NF V05-106-1970 Products derived from citrus fruits Determination of essential oils content (reference method) 《柑类水果的衍生制品 香精油含量的测定(参考法)》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASME B94 33-1996 Jig Bushings《钻套》.pdf

ASME B94 35-1972 Drill Drivers Split-Sleeve Collet Type《钻孔机 有缝夹套型夹板套筒》.pdf

ASME B94 37M-1979 Roller Turner Type Cutting Tools Single Point (Revision of B94 37-1972)《翻滚式单刃切削刀具》.pdf

ASME B94 49-1975 Spade Drill Blades and Spade Drill Holders《扁钻刀刃和扁钻刀柄》.pdf

ASME B94 51M-1999 Specifications for Band Saw Blades (Metal Cutting)《金属切割用带锯条规范》.pdf

ASME B94 52M-1999 Specifications for Hacksaw Blades《弓锯条规范》.pdf

ASME B94 53-1978 Solid Steel Rectangular Metal Cutting Squaring Shear Knives Dimensional Tolerances《实心钢制矩形金属切割四方剪刀尺寸公差》.pdf

ASME B94 54-1999 Specifications for Hole Saws Hole Saw Arbors and Hole Saw Accessories《孔锯、孔锯心轴和孔锯附件规范》.pdf

ASME B94 55M-1985 Tool Life Testing with Single-Point Turning Tools (Revision of ANSI B94 34-1946 and B94 36-1956)《单刃车刀的寿命试验》.pdf