NF X10-132-1975 Measurement of water flow in closed conduits Tracer methods part II constant rate injection method using non-radioactive tracers 《密封管道中水流量的测定 示踪法 第2部分：使用非放射性示踪物的恒速.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

JUS C A4 065-1987 Mechanical testing of metals Hardness conversions for steels《金属的机械测试 钢的硬度换算法》.pdf

JUS C A4 083-1995 Mechanical testing of metals - Elementary concepts and properties relating to fractrure testing《金属的机械试验 断裂韧性试验相关的基本概念和特性 n》.pdf

JUS C A4 084-1995 Mechanical testing of metals - Methods of tests for plane strain fracture toughness (K IC)《金属的机械测试 平面应变断裂韧性KIC试验方法》.pdf

JUS C A4 098-1995 Mechanical testing of metals - Tables of Vickers hardness values for use in tests made on flat surfaces - Less than HV 0 2《金属的机械试验 平面试验用维氏硬度值表-维氏硬度小于0 2》.pdf

JUS C A4 099-1995 Mechanical testing of metals - Calibration of standardized for verification of Vickers bardness testing machines less than HV 0 2《金属的机械试验 检验维氏硬度试验机（维氏硬度小于0 2）用标准硬.pdf

JUS C A4 217-1994 Copper and copper alloys - Testing of seamless round tubes from copper and copper alloys by eddy flow《铜和铜合金 铜和铜合金制无缝圆管的涡流法检测》.pdf

JUS C A5 001 1-1995 Corrosion of metals and alloys - Tems and definitions - Amendments《金属和合金的腐蚀 术语和定义 修订版》.pdf

JUS C A5 001-1990 Corrosion of ir etals and allovs- Terms and definitions《金属和合金的腐蚀 术语和定义》.pdf

JUS C A5 005-1989 Corrosion of metals and alloys Proce ures for removal of corrosion products from corrosion test specimens《金属和合金的腐蚀 腐蚀试样上腐蚀产物的清除方法》.pdf