NORVEN 76-49-1966 《高强度混凝土圆柱以及小梁柱的提取方法和测试方法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 10649-1973 Samplers and installations for peat sample preparation Types and main parameters《泥炭样品制备用取样器和装置 类型和主要参数》.pdf

GOST 10651-1975 Reagents Ammonium phosphate tribasic 3-aqueous Specifications《试剂 磷酸铵三水合物 规范》.pdf

GOST 10652-1973 Reagents Dihydrate ethylenediaminetetraacetic acid disodium salt Specifications《试剂 依地酸二钠二水合物 规范》.pdf

GOST 10653-1984 Gauges for triangular thread of internal-external upset drill pipes with coup lings Types basic dimensions and tolerances《具有镦端的钻管及其套管的螺纹用量规》.pdf

GOST 10654-1981 Gauges for triangular thread for tubing pipes with couplings Types Basic dimensions and tolerances《泵、压缩机用管及其套管三角螺纹用量规 型式 基本尺寸及公差》.pdf

GOST 10655-1981 Gauges for triangular thread for casing pipes with couplings Types Basic dimensions and tolerances《井壁管及其套管三角螺纹用量规 型式 基本尺寸及公差》.pdf

GOST 10656-1963 Sole leather Method for the determination of abrasive resistance in wet state《鞋底皮 测定湿态下耐磨性的方法》.pdf

GOST 10657-1980 Round nuts slotted on face Specifications《表面开槽的圆螺母 规范》.pdf

GOST 10663-1988 Antomatic straightening and cutting machines for round steel model steel and reinforcement Parameters and dimensions Accuracy norms《圆钢 模型钢和钢筋用自动矫直和切割机 参数和尺寸 精度标准》.pdf