NS 3155-1988 Wooden doorsets - Mortices for sylinder and lever mortice locks and their striking.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D1876-2008 Standard Test Method for Peel Resistance of Adhesives (T-Peel Test)《胶粘剂的抗剥离性的标准试验方法(T型剥离试验)》.pdf

ASTM D1876-2008(2015)e1 Standard Test Method for Peel Resistance of Adhesives (T-Peel Test)《胶粘剂抗剥离性的标准试验方法 (T型剥离试验)》.pdf

ASTM D1879-2006 Standard Practice for Exposure of Adhesive Specimens to Ionizing Radiation《暴露在电离辐射下的胶粘剂样品的标准操作规程》.pdf

ASTM D1879-2006(2014) Standard Practice for Exposure of Adhesive Specimens to Ionizing Radiation《暴露在电离辐射下胶粘剂样品的标准操作规程》.pdf

ASTM D1881-1997(2002)e2 Standard Test Method for Foaming Tendencies of Engine Coolants in Glassware《在玻璃器皿中发动机冷却剂起泡倾向的试验方法》.pdf

ASTM D1881-1997(2009) Standard Test Method for Foaming Tendencies of Engine Coolants in Glassware《在玻璃器皿中发动机冷却剂的起泡倾向的标准试验方法》.pdf

ASTM D1881-2017 Standard Test Method for Foaming Tendencies of Engine Coolants in Glassware《玻璃器具中发动机冷却液发泡倾向的标准试验方法》.pdf

ASTM D1882-1996(2006) Standard Test Method for Effect of Cooling System Chemical Solutions on Organic Finishes for Automotive Vehicles《汽车用冷却系统化学溶液对车辆有机面漆产生影响的标准测试方法》.pdf

ASTM D1882-1996(2012) Standard Test Method for Effect of Cooling System Chemical Solutions on Organic Finishes for Automotive Vehicles《汽车用冷却系统化学溶液对车辆有机面漆产生影响的标准试验方法》.pdf