ONORM B 8241-2001 Chimneys - lnsulation layer - Marking of conformity《烟囱 绝缘层 合格标识》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

NF A05-304-1981 High strength steels for civil engineering works Assessment of the embrittling effect of a medium by means of slow tensile testing 《土木工程用高强度钢 在缓张力试验条件下对介质脆化作用的评定》.pdf

NF A05-305-1981 Austenitic stainless steels and Ni - Cr - Fe austenitic stainless alloys Intergrain corrosion under stress test in sodium tetrathionate 《奥氏体不锈钢和镍铬铁奥氏体不锈合金 用四连硫酸钠应力试.pdf

NF A05-311-1995 Corrosion of metals and alloys Determination of dezinfication resistance of brass 《金属和合金材料的腐蚀 黄铜脱锌测定》.pdf

NF A05-315-1996 Nickel-based alloys Determination of resistance to intergranular corrosion 《镍基合金 耐晶间腐蚀性的测定》.pdf

NF A05-400-1998 Evaluation of resistance of steel products to hydrogen induced cracking (HIC) 《钢产品抗氢诱发断裂的评估(欧洲标准EN 10229)》.pdf

NF A05-414-2005 Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in closed water circulation systems 《金属材料防腐蚀保护 封闭水循环系统中腐蚀可能性.pdf

NF A05-501-2-1995 Corrosion of metals and alloys Stress corrosion testing Part 2 preparation and use of bent-beam specimen 《金属和合金的腐蚀 应力腐蚀试验 第2部分 弯曲梁试样的制备和使用》.pdf

NF A05-501-3-1995 Corrosion of metals and alloys Stress corrosion testing Part 3 preparation and use of U-bend specimens 《金属和合金的腐蚀 应力腐蚀试验 第3部分 U型弯曲试样的制备和使用》.pdf

NF A05-501-4-1995 Corrosion of metals and alloys Stress corrosion testing Part 4 preparation and use of uniaxially loaded tension specimens 《金属和合金的腐蚀 应力腐蚀试验 第4部分 单轴载荷拉伸试样的制备和使用》.pdf