ONORM C 2027-4-1997 Pressure fluids - Hydraulic oils - Hydraulic oils HETG - Minimum requirements Fluides sous pression - Huiles hydrauliques - Huiles hydrauliques HETG - Exigences.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 9833-2012 Tools for pressing - Guide pillars type D《冲压工具 D型导柱》.pdf

DIN 9834-2014 Tools for pressing - Guide bushes《冲压工具 导套》.pdf

DIN 9835-1 Bb 1-1987 Elastomer pressure springs for press tools spring characteristics《冲压模具用弹性体压力弹簧 弹簧特性》.pdf

DIN 9835-3-1984 Elastomer pressure springs for press tools testing and requirements《冲压模具用弹性体压力弹簧 检验和要求》.pdf

DIN 9838-2003 Tools for pressing - Ball-lock punch retainer - Type C for light duty《压力器具 球形锁紧凸模固定板 轻载C类》.pdf

DIN 984-2013 Retaining rings with lugs (internal circlips) for use in bores《孔用带凸缘弹性扣环(内部挡圈)》.pdf

DIN 9841-2017 Hexagon socket head shoulder screw for press tools《冲压工具用的带内六角套筒头有肩螺钉》.pdf

DIN 986-2013 Prevailing torque type hexagon domed cap nuts with nonmetallic insert《带有非金属嵌件的常用扭矩式六角盖形螺母》.pdf

DIN 9861-1-1992 Round punches with straight shaft up to 20 mm cutting diameter《切削直径20mm以下带直柄的圆形冲头》.pdf