ONORM EN 288-3-1992 Specification and approval of welding procedures for metallic materials - Welding procedure tests for the arc welding of steels《金属材料的焊接焊接工艺规范和审批 弧焊钢焊接工艺试验》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS 4651-6-1988 Ammonia solution - Methods for determination of chloride content《氨溶液 第6部分 氯化物含量测定方法》.pdf

BS 4651-7-1988 Ammonia solution - Method for determination of carbon dioxide content《氨溶液 第7部分 二氧化碳含量测定方法》.pdf

BS 4652-1995 Specification for zinc-rich priming paint (organic media)《富锌底漆(有机溶剂)规范》.pdf

BS 4655-1986 Method for determination of pile loss of cut-pile and non-loop pile upholstery fabrics《割绒和不起圈绒头室内装饰织物绒毛损失量的测定方法》.pdf

BS 4656-1-1981 Accuracy of machine tools and methods of test - Specification for lathes general purpose type《机床精度及试验方法 第1部分 普通车床规范》.pdf

BS 4656-10-1975 Specification for the accuracy of machine tools and methods of test - Drilling machines radial type《机床精度及试验方法 第10部分 摇臂钻床》.pdf

BS 4656-11-1974 Accuracy of machine tools and methods of test - Drilling machines vertical floor mounted column and pillar types《机床工具的精度及试验方法 落地圆柱立式钻床》.pdf

BS 4656-12-1979 Specification for the accuracy of machine tools and methods of test - Dividing heads《机床精度及试验方法 第12部分 分度头》.pdf

BS 4656-13-1983 Accuracy of machine tools and methods of test - Specification for broaching machines vertical surface type《机床精度及试验方法 第13部分 立式外拉床规范》.pdf