ONORM EN 29142-1993 Adhesives - Guide to the selection of Standard laboratory ageingconditionsfortesting bonded joints (ISO 9142 1990)《粘合剂 胶粘件测试用标准实验室老化条件的选择指南(ISO 9142-1990)》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D6746-2015 7898 Standard Test Method for Determination of Green Strength and Stress Relaxation of Raw Rubber or Unvulcanized Compounds《测定生橡胶或未硫化混合物的湿强度和应力松弛的标准试验方法》.pdf

ASTM D6747-2004 Standard Guide for Selection of Techniques for Electrical Detection of Potential Leak Paths in Geomembrane《电子探测地膜中潜在漏气路径的技术选择的标准指南》.pdf

ASTM D6747-2012 red 8750 Standard Guide for Selection of Techniques for Electrical Detection of Leaks in Geomembranes《土工薄膜泄漏的电探测技术选择用标准指南》.pdf

ASTM D6747-2015 red 5621 Standard Guide for Selection of Techniques for Electrical Leak Location of Leaks in Geomembranes《选择土工薄膜中泄漏的电泄漏位置的标准指南》.pdf

ASTM D6748-2002a Standard Test Method for Determination of Potential Instability of Middle Distillate Fuels Caused by the Presence of Phenalenes and Phenalenones (Rapid Method by P.pdf

ASTM D6748-2002a(2007) 317 Standard Test Method for Determination of Potential Instability of Middle Distillate Fuels Caused by the Presence of Phenalenes and Phenalenones (Rapid M.pdf

ASTM D6748-2002a(2012) 6875 Standard Test Method for Determination of Potential Instability of Middle Distillate Fuels Caused by the Presence of Phenalenes and Phenalenones (Rapid .pdf

ASTM D6748-2002a(2017) 6250 Standard Test Method for Determination of Potential Instability of Middle Distillate Fuels Caused by the Presence of Phenalenes and Phenalenones (Rapid .pdf

ASTM D6749-2002(2007) Standard Test Method for Pour Point of Petroleum Products (Automatic Air Pressure Method)《石油产品倾点的标准测试方法(自动气压法)》.pdf