ONORM L 5261-1981 Testing of milking installations connection for testing《挤奶设备测试 连接测试》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 18928-1973 Truncated form screw plug-gauges for pipe cylindrical threads from 4 up to 6 nominal diameter Construction and basic sizes《直径 4 ～6 圆柱管螺纹用带短牙型的螺纹塞规 结构及基本尺寸》.pdf

GOST 18929-1973 Full form screw ring-gauges for pipe cylindrical threads from 1 16 up to 3 3 4 nominal diameter Construction and basic sizes《直径 1 16 ～3 3 4 圆柱管螺纹用带全牙型的螺纹环规 结构及基本尺.pdf

GOST 18930-1973 Truncated form screw ring-gauges for pipe cylindrical threads from 1 16 up to 3 3 4 nominal diameter Construction and basic sizes《直径 1 16 ～33 4 圆柱管螺纹用带短牙型的螺纹环规 结构.pdf

GOST 18931-1973 Full form screw ring-gauges for pipe cylindrical threads from 4 up to 6 nominal diameter Construction and basic sizes《直径 4 ～6 圆柱管螺纹用带全牙型的螺纹环规 结构及基本尺寸》.pdf

GOST 18932-1973 Truncated from screw ring-gauges for pipe cylindrical threads from 4 up to 6 nominal diameter Construction and basic sizes《直径 4 ～6 圆柱管螺纹用带短牙型的螺纹环规 结构及基本尺寸》.pdf

GOST 18933-1973 Picture tubes (kinescopes) Explosion proof test methods《电子束接收管（显象管） 防爆性试验方法》.pdf

GOST 18953-1973 SSI electric power supply sources General specifications《ГСП供电电源 基本参数技术要求》.pdf

GOST 18954-1973 Gas sampling and storage glass apparatus and tubes (pipettes) Specifications《气体取样和保藏用的玻璃皿和滴管 技术条件》.pdf

GOST 18955-1973 Linear low frequency accelerometers Terms and definitions《线性低频加速度计 术语和定义》.pdf