ONORM M 7801 Teil 5-1981 Edge preparation shapes of grooves for not füll penetrated cross sections for arc welding on steel《边缘加工 电弧焊接钢不充分深入的截面的沟槽形状》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ONORM EN 20898-1-1991 Mechanical properties of fasteners -Bolts screws and studs《紧固件的机械性能 螺栓、螺钉及柱头螺栓》.pdf

ONORM EN 20898-6-1993 Mechanical properties of fasteners - Nuts with specified proof load values - Fine pitch thread Status as of 1989《紧固件的机械性能 具有规定检验荷载值的螺母 细牙螺纹，1989年的状况》.pdf

ONORM EN 209-1986 Steel drums open (removable) head drums with a total capacity of 213 litres《钢桶；总容量为213升的带可挪开盖的鼓形桶》.pdf

ONORM EN 2092-1994 Aerospace series Aluminium alloy AL-P7075-T6 or T62 Clad sheet and strip 0 4 mm or = a or = 6 mm《航空航天系列 铝合金AL－P7075－T6或者 T62-0 4 mm a 6 mm的包覆板和条》.pdf

ONORM EN 2093-1992 Aerospace series - Aluminium alloy AL-P7009-T74 -Hand forgings 20 mm a 150 mm《航空航天系列 铝合金AL-P7009-T74 20 mm a 150 mm手工锻件》.pdf

ONORM EN 2094-1992 Aerospace series - Aluminium alloy AL-P7009-T74 -Die forgings 3 mm a 150 mm《航空航天系列 铝合金AL－P7009－T74 3mm a 150mm的模锻件》.pdf

ONORM EN 21-1993 Wood preservatives - Determination of the toxic values against Anobium punctatum (De Geer) by larval transfer (Laboratory method)《木材防腐剂 用幼虫转化(实验室法)测定抗家具窃蠹(De Geer).pdf

ONORM EN 210-1986 Steel drums tight head drums with a total capacity of 216 5 litres《钢桶；总容量为213升的不可拆盖的鼓形桶》.pdf

ONORM EN 2100-1992 Aerospace series - Aluminium alloy AL-P2014A-T4511 -Extruded bars and sections a or D 200 mm《航空航天系列 铝合金A AL-P2014A-T4511 a 或 D 200毫米的挤压棒及型材》.pdf