1、PFI Technical Bulletin TB-5 |Denotes Revision (Revised December 2013) MINIMUM INFORMATION REQUIRED FOR THE BIDDING OF PIPE FABRICATION Prepared by Pipe Fabrication Institute Engineering Committee All PFI Standards are advisory only. There is no agreement to adhere to any PFI Standard and their use b
2、y anyone is entirely voluntary. Copyright by PIPE FABRICATION INSTITUTE Dedicated to Technical Advancements and Standardization in the Pipe Fabrication Industry Since 1913 USA 511 Avenue of Americas, # 601 New York, NY 10011 CANADA 655, 32ndAvenue, # 201 Lachine, QC H8T 3G6 WEB SITE www.pfi-institut
3、e.orgPFI Technical Bulletin TB-5 |Denotes Revision (Revised December 2013) MINIMUM INFORMATION REQUIRED FOR THE BIDDING OF PIPE FABRICATION 1. SCOPE 1.1 This technical bulletin provides a “check list” of information that should be considered when preparing an inquiry or request for quotation (RFQ) f
4、or pipe fabrication. Including the items applicable to a project that will permit a Pipe Fabricator to prepare the most responsive proposal to an inquiry. 1.2 The information listed in this technical bulletin is not all-inclusive, and it is the responsibility of the Fabricator and/or the Customer to
5、 identify any special or unusual requirements in the inquiry or bidding documents. 2. REQUEST FOR QUOTATION (RFQ)-COMMERCIAL INFORMATION 2.1 Quotation description Type of quotation request (i.e.; lump sum, cost plus, unit price, or other format) 2.2 Inquiry specifics Price validity period Terms of p
6、ayment Escalation clause, if applicable Buyer/fabricator material responsibility 2.3 Freight requirements Loading and shipping (PFI ES-37) Anticipated shipping dates Shipping address Shipping point (F.O.B. point, etc.) Type of freight carrier (motor freight, dedicated truck, rail, etc.) Terms (colle
7、ct, prepaid A complete list of PFI members and available membership CHARTER MEMBERS CONTRACTOR MEMBERS ASSOCIATE MEMBERS AFFILIATE MEMBERS HONORARY MEMBERS Associate and Affiliate member contributors Walter Sperko Sperko Engineering Services, Inc. Greensboro, NC Thomas Warrelmann Victaulic Company o
8、f America Easton, PA Sheryl Michalak Welding Outlets, Inc. Houston, TX PFI Standards and Technical Bulletins are published to serve proven needs of the pipe fabricating industry at the design level and in actual shop operations. Hence, such needs are continually considered and reviewed by the Engine
9、ering Committee of the Pipe Fabrication Institute to provide recommended procedures, which have been demonstrated by collective experiences to fulfill requirements in a manner for Code compliance. However, as the PFI Standards are for minimum requirements the designer or fabricator always has the option of specifying supplementary conditions in the form of requirements beyond the scope of the PFI publications.
