PS 138-1962 SPECIFICATION FOR REFINED SUGAR《存货、家用深色织物干洗用标记墨水》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM C942-2015 Standard Test Method for Compressive Strength of Grouts for Preplaced-Aggregate Concrete in the Laboratory《在实验室内测定预置集料混凝土的压缩强度的标准试验方法》.pdf

ASTM C943-2002 Standard Practice for Making Test Cylinders and Prisms for Determining Strength and Density of Preplaced-Aggregate Concrete in the Laboratory《在实验室内进行预置集料混凝土的密度和强度试验用.pdf

ASTM C943-2010 Standard Practice for Making Test Cylinders and Prisms for Determining Strength and Density of Preplaced-Aggregate Concrete in the Laboratory《在实验室内进行预置集料混凝土的密度和强度测定用.pdf

ASTM C943-2017 Standard Practice for Making Test Cylinders and Prisms for Determining Strength and Density of Preplaced-Aggregate Concrete in the Laboratory《实验室测定预掺骨料混凝土强度和密度的试验圆柱体.pdf

ASTM C944 C944M-1999(2005)e1 Standard Test Method for Abrasion Resistance of Concrete or Mortar Surfaces by the Rotating-Cutter Method《用旋转切割机法对混凝土或砂浆表面耐磨性的标准试验方法》.pdf

ASTM C944 C944M-2012 Standard Test Method for Abrasion Resistance of Concrete or Mortar Surfaces by the Rotating-Cutter Method《用旋转切割机法对混凝土或砂浆表面耐磨性的标准试验方法》.pdf

ASTM C944-1999(2005) Standard Test Method for Abrasion Resistance of Concrete or Mortar Surfaces by the Rotating-Cutter Method《用旋转切割机法对混凝土或砂浆表面耐磨性的试验方法》.pdf

ASTM C945-2005 Standard Practice for Design Considerations and Spray Application of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels《室外容器上刚性蜂窝式聚氨酯绝缘系统的设计考.pdf

ASTM C945-2005(2012) Standard Practice for Design Considerations and Spray Application of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels 《露天使用容器上刚性泡沫聚氨酯.pdf