PS 1424-1978 SPECIFICATION FOR COPPER JOINTING SLEEVES FOR TELEGRAPH AND TELEPHONE PURPOSES《电报和电话用的铜制焊接套袖》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D6712-2001 Standard Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes《超高分子量聚乙烯(UHMW-PE)实心塑料型材标准规范》.pdf

ASTM D6712-2001(2009) 459 Standard Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes《超高分子量聚乙烯制实心塑料型材规范》.pdf

ASTM D6712-2017 6129 Standard Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes《超高分子量聚乙烯(UHMW-PE)实心塑料型材的标准规格》.pdf

ASTM D6713-2001 Standard Specification for Extruded and Compression Molded Shapes Made from Poly(Vinylidene Fluoride) (PVDF)《由聚偏氟乙烯制成的挤制和压模制型材的标准规范》.pdf

ASTM D6713-2001(2009) 374 Standard Specification for Extruded and Compression Molded Shapes Made from Poly(Vinylidene Fluoride) (PVDF)《由聚偏氟乙烯制成的挤制和压模制型材的标准规范》.pdf

ASTM D6713-2014 0202 Standard Specification for Extruded and Compression Molded Shapes Made from Poly&40 Vinylidene Fluoride&41 &40 PVDF&41 《采用聚40 偏二氟乙烯PVDF41制成的挤制和模压成型型材的标准规范》.pdf

ASTM D6714-2001(2006) Standard Test Method for Chromic Oxide in Ashed Wet Blue (Perchloric Acid Oxidation)《灰化湿铬鞣革中氧化铬的标准测试方法(高氯酸氧化作用)》.pdf

ASTM D6714-2001(2010)e1 8750 Standard Test Method for Chromic Oxide in Ashed Wet Blue (Perchloric Acid Oxidation)《灰化湿铬鞣革中氧化铬的标准试验方法(高氯酸氧化)》.pdf

ASTM D6714-2001(2015) 0908 Standard Test Method for Chromic Oxide in Ashed Wet Blue (Perchloric Acid Oxidation)《灰化湿蓝皮中氧化铬的标准试验方法 (高氯酸氧化法)》.pdf