PS 1646-1-1984 PARALLEL SHANKS FOR MILLING CUTTERSPART-I DIMENSIONAL CHARACTERISTICS OF PLAIN PARALLEL SHANKS 《直柄铣刀 第1部分 普通直柄的型号和尺寸》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DZ 25-1983 地质钻探钻杆锁接头.pdf

DZ 26-1983 地质钻探钻杆锁接头接头螺纹量规.pdf

DZ 27-1983 SDS蹲击式试验振筛机.pdf

DZ 28.0-1984 地质仪器产品基本环境.试验条件及方法.总则.pdf

DZ 28.1-1984 地质仪器产品基本环境.试验条件及方法.温度试验.pdf

DZ 4-1981 地质仪器仪表产品型号编制方法.pdf

DZ 5-1981 地质机械产品铜铸件通用技术条件.pdf

DZ 6-1981 地质机械产品通用技术条件.pdf

DZ 7-1981 地质机械产品装配通用技术条件.pdf