REG NASA-LLIS-4058-2011 Lessons Learned - Use of Propellant Grade Commodities for Fuel Cell Powerplants.pdf

上传人:appealoxygen216 文档编号:1019442 上传时间:2019-03-21 格式:PDF 页数:4 大小:119.21KB
下载 相关 举报
REG NASA-LLIS-4058-2011 Lessons Learned - Use of Propellant Grade Commodities for Fuel Cell Powerplants.pdf_第1页
第1页 / 共4页
REG NASA-LLIS-4058-2011 Lessons Learned - Use of Propellant Grade Commodities for Fuel Cell Powerplants.pdf_第2页
第2页 / 共4页
REG NASA-LLIS-4058-2011 Lessons Learned - Use of Propellant Grade Commodities for Fuel Cell Powerplants.pdf_第3页
第3页 / 共4页
REG NASA-LLIS-4058-2011 Lessons Learned - Use of Propellant Grade Commodities for Fuel Cell Powerplants.pdf_第4页
第4页 / 共4页
亲,该文档总共4页,全部预览完了,如果喜欢就下载吧!
资源描述

1、Public Lessons Learned Entry: 4058 Lesson Info: Lesson Number: 4058 Lesson Date: 2010-09-20 Submitting Organization: KSC Submitted by: Annette Pitt Subject: Use of Propellant Grade Commodities for Fuel Cell Powerplants Abstract: Space Shuttle Alkaline Fuel Cell Powerplants (FCPs) use O2 and H2 as re

2、actants. These FCPs require higher grade LH2 and LO2 (99.99% and 99.989% purity levels, respectively) than Space Shuttle Main Engines (99.9% LH2 and 99.2% LO2). Proton Exchange Membrane (PEM) FCPs have been developed that can use propellant grade reactants. This means that a common liquid oxygen and

3、 liquid hydrogen system could potentially be designed for both propulsion and electrical power generation requirements as well as for Environmental Control and Life Support System (ECLSS). This would simplify cryogenic loading operations by getting rid of extra pad clears and load operations for the

4、 FCP Power Reactant Storage and Distribution (PRSD) system and potentially consolidating into one “cryo load.“ In addition, if propellant grade reactants were used for Lunar or Mars surface lander FCPs, the FCPs could scavenge the residual propellants for use in the FCP (assuming that any pressurant

5、 such as Helium could be removed from the propellant tanks. Description of Driving Event: During Constellation Program Altair Lunar Surface Access Module design discussions, this issue was discussed as a potential method to lower cost and mass that must be carried. It was also raised as a goal durin

6、g KSC FCP/PRSD engineer discussions with engineers from other centers while working on fuel cell research projects. Lesson(s) Learned: Although technical issues remain, such as how to effectively eliminate residual pressurants from propellant tanks and how to design the FCP to accommodate for and ef

7、fectively remove the additional impurities that would collect in the fuel cell, there is much merit for designing a FCP system that could use propellant grade reactants. Provided by IHSNot for Resale-,-,-Space Shuttle FCP Space Shuttle PRSD Tank Provided by IHSNot for Resale-,-,-Recommendation(s): I

8、n the future, during the initial design phase for spacecraft that will utilize FCPs, determine if there exist FCPs that can meet design requirements if propellant grade reactants are used. If so, then perform a trade study to determine whether the advantages of doing so warrant such a design. Eviden

9、ce of Recurrence Control Effectiveness: N/A Documents Related to Lesson: N/A Mission Directorate(s): Space Operations Exploration Systems Science Additional Key Phrase(s): Lander Systems Environmental Control and Life Support Systems Crew Survival Systems Mission and systems trade studies Orbiting V

10、ehicles Power Propulsion Spacecraft and Spacecraft Instruments Long term sustainability and maintenance planning Level II/III requirements definition Engineering design and project processes and standards Vehicle concepts Mission concepts and life-cycle planning Planetary entry and landing concepts

11、Spacecraft Crew operations and support concepts Research & Development Pressure Vessels Energy Cryogenic Systems Planetary Operations Lunar Operations Crew Operations Additional Info: Project: Space Shuttle Program Provided by IHSNot for Resale-,-,-Approval Info: Approval Date: 2011-07-22 Approval Name: mbell Approval Organization: HQ Provided by IHSNot for Resale-,-,-

展开阅读全文
相关资源
猜你喜欢
  • FORD WSS-M1A271-B-2002 STEEL COIL AND LEAF SPRINGS  TO BE USED WITH FORD WSS-M99P1111-A  《盘簧和板簧用钢  与标准FORD WSS-M99P1111-A一起使用  [替代 FORD WSD-M1A271-A4 FORD WSD-M1A271-A12]》.pdf FORD WSS-M1A271-B-2002 STEEL COIL AND LEAF SPRINGS TO BE USED WITH FORD WSS-M99P1111-A 《盘簧和板簧用钢 与标准FORD WSS-M99P1111-A一起使用 [替代 FORD WSD-M1A271-A4 FORD WSD-M1A271-A12]》.pdf
  • FORD WSS-M1A272-B-2002 STEEL SUSPENSION STABILIZER BAR  TO BE USED WITH FORD WSS-M99P1111-A  《悬挂平衡杆用钢  与标准FORD WSS-M99P1111-A一起使用  [替代 FORD WSD-M1A272-A1 FORD WSD-M1A272-A4 FORD WS.pdf FORD WSS-M1A272-B-2002 STEEL SUSPENSION STABILIZER BAR TO BE USED WITH FORD WSS-M99P1111-A 《悬挂平衡杆用钢 与标准FORD WSS-M99P1111-A一起使用 [替代 FORD WSD-M1A272-A1 FORD WSD-M1A272-A4 FORD WS.pdf
  • FORD WSS-M1A322-A3-2006 STEEL SHEET BORON TREATED HIGH STRENGTH (EUROPEAN APPLICATIONS)  TO BE USED WITH FORD WSS-M99P1111-A  《高强度经硼处理的钢板(欧洲地区使用)  与标准FORD WSS-M99P1111-A一起使用 》.pdf FORD WSS-M1A322-A3-2006 STEEL SHEET BORON TREATED HIGH STRENGTH (EUROPEAN APPLICATIONS) TO BE USED WITH FORD WSS-M99P1111-A 《高强度经硼处理的钢板(欧洲地区使用) 与标准FORD WSS-M99P1111-A一起使用 》.pdf
  • FORD WSS-M1A325-B1-2006 STEEL SHEET ZINC NICKEL ALUMINUM RICH ORGANIC COATING  TO BE USED WITH FORD WSS-M99P1111-A  《锌 镍 有机富铝涂层 锌 镍薄钢板(和FORD WSS-M99P1111-A一起使用)》.pdf FORD WSS-M1A325-B1-2006 STEEL SHEET ZINC NICKEL ALUMINUM RICH ORGANIC COATING TO BE USED WITH FORD WSS-M99P1111-A 《锌 镍 有机富铝涂层 锌 镍薄钢板(和FORD WSS-M99P1111-A一起使用)》.pdf
  • FORD WSS-M1A331-B-2002 STEEL HIGH STRENGTH WELDED TUBING  TO BE USED WITH FORD WSS-M99P1111-A  《高强度钢焊接管  与标准FORD WSS-M99P1111-A一起使用 》.pdf FORD WSS-M1A331-B-2002 STEEL HIGH STRENGTH WELDED TUBING TO BE USED WITH FORD WSS-M99P1111-A 《高强度钢焊接管 与标准FORD WSS-M99P1111-A一起使用 》.pdf
  • FORD WSS-M1A337-A6-2011 STEEL SHEET LAMINATED SOUND VIBRATION DAMPING  TO BE USED WITH FORD WSS-M99P1111-A  《层压吸声 减震钢板  与福特WSS-M99P1111-A  一起使用 在福特WSD-M1A337-A1中显示》.pdf FORD WSS-M1A337-A6-2011 STEEL SHEET LAMINATED SOUND VIBRATION DAMPING TO BE USED WITH FORD WSS-M99P1111-A 《层压吸声 减震钢板 与福特WSS-M99P1111-A 一起使用 在福特WSD-M1A337-A1中显示》.pdf
  • FORD WSS-M1A338-A1-2013 STEEL SHEET HOT ROLLED HIGH STRENGTH CARBON MANGANESE TYPE  TO BE USED WITH FORD WSS-M99P1111-A  (No direct replacement use CBP strategy).pdf FORD WSS-M1A338-A1-2013 STEEL SHEET HOT ROLLED HIGH STRENGTH CARBON MANGANESE TYPE TO BE USED WITH FORD WSS-M99P1111-A (No direct replacement use CBP strategy).pdf
  • FORD WSS-M1A339-A1-1999 STEEL SHEET DENT RESISTANT.pdf FORD WSS-M1A339-A1-1999 STEEL SHEET DENT RESISTANT.pdf
  • FORD WSS-M1A340-A1-2007 STEEL FORGING AIR COOLED MEDIUM CARBON  TO BE USED WITH FORD WSS-M99P1111-A  《空气冷却的中碳钢锻件  与标准FORD WSS-M99P1111-A一起使用  [替代 FORD SS-M1A9125-A]》.pdf FORD WSS-M1A340-A1-2007 STEEL FORGING AIR COOLED MEDIUM CARBON TO BE USED WITH FORD WSS-M99P1111-A 《空气冷却的中碳钢锻件 与标准FORD WSS-M99P1111-A一起使用 [替代 FORD SS-M1A9125-A]》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1