1、*USACE / NAVFAC / AFCESA / NASA UFGS-27 21 10.00 40 (May 2013)-Preparing Activity: NASA SupersedingUFGS-27 21 10.00 40 (February 2011)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated April 2013*SECTION TABLE OF CONTENTSDIVISION 27 - COMMUNICATIONSSECTION 27 21 10.00
2、 40FIBER OPTIC DATA TRANSMISSION SYSTEM05/13PART 1 GENERAL1.1 REFERENCES1.2 SUBMITTALS1.3 SYSTEM DESCRIPTION1.3.1 General1.3.2 Environmental Requirements1.3.3 Hazardous Environment1.3.4 Electrical Requirements1.3.5 Input Line Surge Protection1.3.6 Power Line Surge Protection1.3.7 Spare Parts1.4 DELI
3、VERY OF TECHNICAL DATA1.4.1 Group I Technical Data Package1.4.1.1 System Drawings1.4.1.2 Equipment Data1.4.1.3 Data Transmission System Description and Analyses1.4.1.4 System Overall Reliability Calculations1.4.1.5 Certifications1.4.1.6 Key Control Plan1.4.2 Group II Technical Data Package1.4.3 Grou
4、p III Technical Data Package1.4.4 Group IV Technical Data Package1.4.4.1 Performance Verification and Endurance Testing Data1.4.4.2 Operation and Maintenance Data1.4.4.3 Training Data1.4.5 Group V Technical Data Package1.4.5.1 Functional Design Manual1.4.5.2 Hardware Manual1.4.5.3 Maintenance Manual
5、1.4.5.4 Operators Manual1.4.6 Group VI Technical Data PackagePART 2 PRODUCTS2.1 FO MODEMSSECTION 27 21 10.00 40 Page 1Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-2.1.1 FO Modem Operating Wavelength2.1.2 FO Modem Inputs and Outputs2.2 FO TRANSMITT
6、ER AND RECEIVER MODULES2.2.1 Analog FO Transmitter and Receiver Modules2.2.2 Digital FO Transmitter and Receiver Modules2.2.3 FO Transmitter Module2.2.4 FO Receiver Module2.3 FO DIGITAL REPEATERS2.4 FO ANALOG REPEATERS2.5 TRANSCEIVERS FOR VIDEO APPLICATIONS2.6 TRANSCEIVERS FOR LAN APPLICATIONS2.7 FO
7、 SWITCHES2.8 FO SPLITTER/COMBINER2.9 FIBER OPTIC DIGITAL REPEATERS (FODR)2.10 DATA TRANSMISSION CONVERTER2.11 ENCLOSURES2.11.1 Interior2.11.2 Exterior2.11.3 Corrosive Environment2.11.4 Hazardous Environment2.12 TAMPER AND PHYSICAL PROTECTION PROVISIONS2.12.1 Enclosure Covers2.12.2 Conduit-Enclosure
8、Connections2.12.3 Locks and Key-Lock-Operated Switches2.12.3.1 Locks2.12.3.2 Key-Lock-Operated Switches2.13 SYSTEM REQUIREMENTS2.13.1 Signal Transmission Format Code2.13.2 Flux Budget/Gain Margin2.13.3 Receiver Dynamic Range2.14 OPTICAL FIBERS2.14.1 General2.14.2 50 Micron Multimode Fibers2.14.3 62.
9、5 Micron Multimode Fibers2.14.4 8.3 Micron Single-Mode Fibers2.15 CROSS-CONNECTS2.15.1 Patch Panels2.15.2 Patch Cords2.16 CABLE CONSTRUCTION2.16.1 General2.16.2 Exterior Cable2.16.2.1 Aerial Cable2.16.2.2 Duct Cable2.16.2.3 Direct Burial Cable2.16.3 Interior Cable2.16.4 Pigtail Cables2.17 FO CONNECT
10、ORS2.18 MECHANICAL SPLICES2.19 FUSION SPLICES2.20 CONDUIT, FITTINGS AND ENCLOSURES2.21 FAN-OUT KITSPART 3 EXECUTION3.1 INSTALLATION3.1.1 Interior Work3.1.2 Exterior Work, Aerial3.1.3 Exterior Work Underground3.1.4 Service LoopsSECTION 27 21 10.00 40 Page 2Provided by IHSNot for ResaleNo reproduction
11、 or networking permitted without license from IHS-,-,-3.1.5 Metallic Sheath Grounding3.1.6 Splices3.1.6.1 General3.1.6.2 Mechanical Splices3.1.7 Connectors3.1.8 Identification and Labeling3.1.9 Enclosure Sizing and Cable3.1.10 Enclosure Penetrations3.2 TESTING3.2.1 General3.2.2 Field Test3.2.2.1 Opt
12、ical Time Domain Reflectometer Tests3.2.2.2 Power Attenuation Test3.2.2.3 Gain Margin Test3.2.2.4 Analog Video Signal Test3.2.2.5 Digital Video Signal Test3.2.2.6 Performance Verification Test and Endurance Test3.3 TRAINING3.3.1 General3.3.2 System Maintenance Training Course- End of Section Table o
13、f Contents -SECTION 27 21 10.00 40 Page 3Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-*USACE / NAVFAC / AFCESA / NASA UFGS-27 21 10.00 40 (May 2013)-Preparing Activity: NASA SupersedingUFGS-27 21 10.00 40 (February 2011)UNIFIED FACILITIES GUIDE SP
14、ECIFICATIONSReferences are in agreement with UMRL dated April 2013*SECTION 27 21 10.00 40FIBER OPTIC DATA TRANSMISSION SYSTEM05/13*NOTE: This guide specification covers the requirements for fiber optics data transmission systems.Adhere to UFC 1-300-02 Unified Facilities Guide Specifications (UFGS) F
15、ormat Standard when editing this guide specification or preparing new project specification sections. Edit this guide specification for project specific requirements by adding, deleting, or revising text. For bracketed items, choose applicable items(s) or insert appropriate information.Remove inform
16、ation and requirements not required in respective project, whether or not brackets are present.Comments, suggestions and recommended changes for this guide specification are welcome and should be submitted as a Criteria Change Request (CCR).*PART 1 GENERAL*NOTE: There are two ways the designer can r
17、equire the submission of data concerning fiber optic equipment. The most common way is through the use of submittals. However, the Federal Acquisition Regulations apply special constraints on some types of technical data that fall under the Data Requirements Clause. Generally, the technical data ass
18、ociated with fiber optic data transmission systems do not fall under the special Data Requirements Clause. However, if other systems such as EMCS, UMCS, IDS, ESS, and CCTV, interconnected by FO systems do fall within the special category, the associated FO technical data should be acquired in the sa
19、me manner. Therefore, if some systems used with this specification fall under the special Data Requirements Clause, use sub-paragraph a. below for SECTION 27 21 10.00 40 Page 4Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-guidance.a. The acquisitio
20、n of all technical data, data bases and computer software items that are identified herein will be accomplished strictly in accordance with the Federal Acquisition Regulation (FAR) and the Department of Defense Federal Acquisition Regulation Supplement (DOD FARS). Those regulations, as well as the A
21、rmy and Corps of Engineers implementations thereof, should also be consulted to ensure that a delivery of critical items of technical data is not inadvertently lost. Specifically, the Rights in Technical Data Non-commercial, DOD FARS 52.227-7013, and DOD FARS 52.227-7031 Reserved, as well as any req
22、uisite software licensing agreements will be made a part of the CONTRACT CLAUSES or SPECIAL CONTRACT REQUIREMENTS of the contract. In addition, the appropriate DD Form 1423, Contract Data Requirements List, will be filled out for each distinct deliverable item and made a part of the contract. Where
23、necessary, a DD Form 1664, Data Item Description, shall be used to explain and more fully identify the data items listed on the DD Form 1423. It is to be noted that all of these clauses and forms are required to assure the delivery of the data in question and that such data is obtained with the requ
24、isite rights to use by the Government. Include with the request for proposals a completed DD Form 1423, Contract Data Requirements List. This form is essential to obtain delivery of all documentation. Each deliverable will be clearly specified, both description and quantity being required.*1.1 REFER
25、ENCES*NOTE: This paragraph is used to list the publications cited in the text of the guide specification. The publications are referred to in the text by basic designation only and listed in this paragraph by organization, designation, date, and title.Use the Reference Wizards Check Reference featur
26、e when you add a RID outside of the Sections Reference Article to automatically place the reference in the Reference Article. Also use the Reference Wizards Check Reference feature to update the issue dates.References not used in the text will automatically be deleted from this section of the projec
27、t specification when you choose to reconcile references in the publish print process.*SECTION 27 21 10.00 40 Page 5Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-The publications listed below form a part of this specification to the extent reference
28、d. The publications are referred to within the text by the basic designation only.CONSUMER ELECTRONICS ASSOCIATION (CEA)CEA 170 (1957) Electrical Performance Standards - Monochrome Television Studio FacilitiesELECTRONIC COMPONENTS ASSOCIATION (ECA)ECA EIA/ECA 310 (2005) Cabinets, Racks, Panels, and
29、Associated EquipmentELECTRONIC INDUSTRIES ALLIANCE (EIA)ANSI/TIA-455-80C (2003) FOTP-80 - IEC 60793-1-144 Optical fibres Part 1-44: Measurement Methods and Test Procedures - Cut-off WavelengthINSTITUTE OF ELECTRICAL AND ELECTRONICS ENGINEERS (IEEE)IEEE C2 (2012; Errata 2012; INT 1-4 2012) National E
30、lectrical Safety CodeIEEE C62.41.1 (2002; R 2008) Guide on the Surges Environment in Low-Voltage (1000 V and Less) AC Power CircuitsIEEE C62.41.2 (2002) Recommended Practice on Characterization of Surges in Low-Voltage (1000 V and Less) AC Power CircuitsNATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION
31、(NEMA)NEMA 250 (2008) Enclosures for Electrical Equipment (1000 Volts Maximum)NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)NFPA 70 (2011; Errata 2 2012) National Electrical CodeTELECOMMUNICATIONS INDUSTRY ASSOCIATION (TIA)TIA-232 (1997f; R 2002) Interface Between Data Terminal Equipment and Data Circu
32、it-Terminating Equipment Employing Serial Binary Data InterchangeTIA-455-104 (1993a; R 2000; R 2005) Standard for FOTP-104 Fiber Optic Cable Cyclic Flexing TestTIA-455-13 (1996a; R 2012) FOTP-13 Visual and Mechanical Inspection of Fiber Optic Components, Devices, and AssembliesTIA-455-177 (2003b) FO
33、TP-177 IEC-60793-1-43: SECTION 27 21 10.00 40 Page 6Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Measurement Methods and Test Procedures - Numerical ApertureTIA-455-46A (1990) FOTP-46 Spectral Attenuation Measurement for Long-Length, Graded-Index
34、Optical FibersTIA-455-47B (1992) FOTP-47 Output Far Field Radiation Pattern MeasurementTIA-455-58 (2001b) FOTP-58 Core Diameter Measurement of Graded-Index Optical FibersTIA-455-78-B (2002) FOTP-78 Optical Fibres - Part 1-40: Measurement Methods and Test Procedures - AttenuationTIA-455-82 (1992b) FO
35、TP-82 Fluid Penetration Test for Fluid-Blocked Fiber Optic CableTIA-455-91 (1986; R 1996) FOTP-91 Fiber Optic Cable Twist-Bend TestTIA-485 (1998a; R 2003) Electrical Characteristics of Generators and Receivers for Use in Balanced Digital Multipoint SystemsTIA/EIA-455-171 (2001a) FOTP-171 - Attenuati
36、on by Substitution Measurement for Short-Length Multimode Graded-Index and Single-Mode Optical Fiber Cable AssembliesTIA/EIA-455-204 (2000) Standard for Measurement of Bandwidth on Multimode FiberTIA/EIA-455-25 (2002c) FOTP-25 Impact Testing of Optical Fiber CablesTIA/EIA-455-41 (1993a; R 2001) FOTP
37、-41 Compressive Loading Resistance of Fiber Optic CablesTIA/EIA-455-81 (2000b) FOTP-81 Compound Flow (Drip) Test for Filled Fiber Optic CableTIA/EIA-455-88 (2001) FOTP-88 Fiber Optic Cable Bend TestTIA/EIA-606 (2002a; Errata 2007; R 2007; Adm 1 2008) Administration Standard for the Telecommunication
38、s InfrastructureU.S. NATIONAL ARCHIVES AND RECORDS ADMINISTRATION (NARA)47 CFR 15 Radio Frequency DevicesUNDERWRITERS LABORATORIES (UL)UL 1666 (2007; Reprint Jun 2012) Test for Flame Propagation Height of Electrical and Optical-Fiber Cables Installed Vertically SECTION 27 21 10.00 40 Page 7Provided
39、by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-in Shafts1.2 SUBMITTALS*NOTE: Review Submittal Description (SD) definitions in Section 01 33 00 SUBMITTAL PROCEDURES and edit the following list to reflect only the submittals required for the project.The Guide
40、Specification technical editors have designated those items that require Government approval, due to their complexity or criticality, with a “G.“ Generally, other submittal items can be reviewed by the Contractors Quality Control System. Only add a “G” to an item, if the submittal is sufficiently im
41、portant or complex in context of the project.For submittals requiring Government approval on Army projects, a code of up to three characters within the submittal tags may be used following the “G“ designation to indicate the approving authority. Codes for Army projects using the Resident Management
42、System (RMS) are: “AE“ for Architect-Engineer; “DO“ for District Office (Engineering Division or other organization in the District Office); “AO“ for Area Office; “RO“ for Resident Office; and “PO“ for Project Office. Codes following the “G“ typically are not used for Navy, Air Force, and NASA proje
43、cts.Choose the first bracketed item for Navy, Air Force and NASA projects, or choose the second bracketed item for Army projects.*Government approval is required for submittals with a “G“ designation; submittals not having a “G“ designation are for Contractor Quality Control approval. information on
44、ly. When used, a designation following the “G“ designation identifies the office that will review the submittal for the Government. Submit the following in accordance with Section 01 33 00 SUBMITTAL PROCEDURES:SD-02 Shop DrawingsFiber Optic System; G; G, _Installation; G; G, _SD-03 Product DataFiber
45、 Optic SystemSpare PartsSD-06 Test ReportsTest Procedures and Reports; G; G, _SECTION 27 21 10.00 40 Page 8Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SD-07 CertificatesFiber Optic SystemSD-08 Manufacturers InstructionsManufacturers Instructions; G; G, _SD-10 Operation and Maintenance DataSystem Maintenance Training Course1.3 SYSTEM DESCRIPTION1.3.1 General*
