RTCA DO-262B-2014 Minimum Operational Performance Standards for Avionics Supporting Next Generation Satellite Systems (NGSS) .pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

QJ 347-1978 盲孔用直柄扩孔钻 D=5~15.pdf

QJ 348-1978 盲孔用锥柄扩孔钻 D=12~32.pdf

QJ 349-1978 盲孔用套装扩孔钻 D=32~60.pdf

QJ 350-1978 通孔用硬质合金扩孔钻 D=12~32.pdf

QJ 351-1978 通孔用套装硬质合金扩孔钻 D=32~60.pdf

QJ 352-1978 盲孔用锥柄硬质合金扩孔钻 D=12~32.pdf

QJ 353-1978 槽形铣刀.pdf

QJ 354-1978 高速钢浮动粗镗刀 D=50~240.pdf

QJ 355-1978 高速钢浮动精镗刀 D=50~240.pdf