1、_SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising theref
2、rom, is the sole responsibility of the user.” SAE reviews each technical report at least every five years at which time it may be revised, reaffirmed, stabilized, or cancelled. SAE invites your written comments and suggestions.Copyright 2012 SAE International All rights reserved. No part of this pub
3、lication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970
4、(outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.orgSAE values your input. To provide feedback on this Technical Report, please visit http:/www.sae.org/technical/standards/AMS5893BAEROSPACEMATERIALSPECIFICATIONAMS5893 REV. B Issued 1992-04 Revised 2006-05
5、Reaffirmed 2012-02 Superseding AMS5893A Iron-Nickel Alloy, Bars, Forgings, and Rings 42Fe - 37.5Ni - 14Co - 4.8 (Cb + Ta)(Nb + Ta) - 1.6Ti Solution Heat Treated, Short-Time Precipitation Hardenable Multiple Melted, High Temperature, Low Expansion (Composition similar to UNS N19909)RATIONALEAMS5893B has been reaffirmed to comply with the SAE five-year review policy. SAE AMS5893B Page 2 of 8 SAE AMS5893B Page 3 of 8 SAE AMS5893B Page 4 of 8 SAE AMS5893B Page 5 of 8 SAE AMS5893B Page 6 of 8 SAE AMS5893B Page 7 of 8 SAE AMS5893B Page 8 of 8
