1、 AEROSPACE STANDARD COUPLINGS, CLAMP, GROOVED, V-BAND, 1.75 TO 14.25 FLANGE OD (-65 TO 1200 F) AS5355/3Copyright 2017 SAE International All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical
2、 photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970 (outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org ISSUED1998-09REAFFIRMED 201
3、5-04REVISED2017-04THIRD ANGLE PROJECTION CUSTODIAN: G-3/G-3A REV.BFEDERAL SUPPLY CLASS 5340 AS5355/3 SHEET 1 OF 3 REV. B PROCUREMENT SPECIFICATION: AS5355 /1/, /2/, /3/ SAETechnicalStandardsBoard Rulesprovidethat:“Thisreportispublished bySAEto advance the state oftechnicaland engineering sciences.Th
4、e use ofthisreportisentirelyvoluntary,anditsapplicabilityandsuitabilityforanyparticularuse,includinganypatentinfringementarising therefrom,isthe sole responsibilityoftheuser.”SAEreviewseachtechnicalreportatleasteveryfiveyearsatwhich time itmaybe revised,reaffirmed,stabilized,orcancelled.SAEinvitesyo
5、urwritten commentsandsuggestions.SAE values your input. To provide feedback on this Technical Report, please visit http:/standards.sae.org/AS5355/3B RATIONALE THIS REVISION CORRECTS THE LOCATION OF THE “B“ DIMENSION AND REVISED TABLE 1. FIGURE 1 - V-BAND COUPLING CLAMP TABLE 1 - DIMENSIONS SIZE CODE
6、 RANGE /4/ B MAX B B MAX R D MAX B D MAX R BOLT DIA R .020 01-09 2.78 2.78 .750 1.10 .250 .055 10-21 3.03 3.03 .875 1.25 .312 .063 22-37 3.53 3.53 .875 1.25 .312 .063 AEROSPACE STANDARD AS5355/3 SHEET 2 OF 3 REV. B COUPLINGS, CLAMP, GROOVED, V-BAND, 1.75 TO 14.25 FLANGE OD (-65 TO 1200 F) TABLE 2 -
7、DIMENSIONS AND WEIGHTS BASIC NUMBER AS5355/3 SIZE CODE FLANGE OD AS24563 TYPE 2 AXIAL LOAD RATING (LBF) A +.03 .06 C MAX B C MAX R RATING NUT TORQUE (LBF-IN) LB/EA MAX B LB/EA MAX R 01 1.75 10670 1.88 1.75 1.85 60 .39 .43 02 1.88 10705 2.00 1.80 1.90 60 .40 .44 03 2.00 10745 2.12 1.85 1.95 60 .41 .4
8、5 04 2.12 10780 2.25 1.90 2.00 65 .42 .46 05 2.25 10820 2.38 2.00 2.10 65 .43 .47 06 2.38 10855 2.50 2.05 2.15 65 .43 .47 07 2.50 10890 2.62 2.10 2.20 65 .44 .48 08 2.62 10930 2.75 2.20 2.30 65 .45 .49 09 2.75 10970 2.88 2.25 2.35 65 .46 .50 10 2.88 16750 3.00 2.45 2.50 120 .82 .90 11 3.00 16850 3.1
9、2 2.50 2.60 120 .84 .92 12 3.12 17000 3.25 2.60 2.65 125 .86 .94 13 3.25 17150 3.38 2.65 2.70 125 .88 .96 14 3.50 17300 3.62 2.75 2.85 125 .90 .98 15 3.75 17600 3.88 2.90 2.95 125 .95 1.03 16 4.00 17800 4.12 3.00 3.10 130 .99 1.07 17 4.25 18100 4.38 3.15 3.20 130 1.03 1.11 18 4.75 18600 4.88 3.40 3.
10、45 135 1.10 1.18 19 5.25 19050 5.38 3.65 3.70 135 1.18 1.26 20 5.75 19500 5.88 3.90 3.95 140 1.25 1.33 21 6.25 20000 6.38 4.15 4.20 145 1.67 1.75 22 6.75 20600 6.88 4.40 4.45 150 1.75 1.83 23 7.25 21000 7.38 4.65 4.70 150 1.82 1.90 24 7.75 21650 7.88 4.90 4.95 155 1.91 1.99 25 8.25 22000 8.38 5.15 5
11、20 160 1.99 2.07 26 8.75 22700 8.88 5.40 5.45 165 2.07 2.15 27 9.25 23250 9.38 5.65 5.70 170 2.15 2.23 28 9.75 23800 9.88 5.90 5.95 170 2.22 2.30 29 10.25 24300 10.38 6.15 6.20 175 2.31 2.39 30 10.75 24850 10.88 6.40 6.45 180 2.39 2.47 31 11.25 25350 11.38 6.65 6.70 185 2.47 2.55 32 11.75 25900 11.
12、88 6.90 6.95 185 2.55 2.63 33 12.25 26450 12.38 7.15 7.20 190 2.62 2.70 34 12.75 27000 12.88 7.40 7.45 195 2.71 2.79 35 13.25 27500 13.38 7.65 7.70 200 2.79 2.87 36 13.75 28050 13.88 7.90 7.95 205 2.87 2.95 37 14.25 28550 14.38 8.15 8.20 205 2.94 3.02 NOTES /1/ MATERIAL: A-286 STAINLESS STEEL PER PR
13、OCUREMENT SPECIFICATION AS5355. /2/ FINISH: PASSIVATE STAINLESS STEEL PER ASTM A967 OR AMS2700. /3/ QUALIFICATION: PRODUCT SUPPLIED TO THIS SPECIFICATION SHALL BE MANUFACTURED BY AN ACCREDITED MANUFACTURER LISTED IN THE PERFORMANCE REVIEW INSTITUTE (PRI) QUALIFIED PRODUCTS LIST (QPL), PRI-QPL-AS5355
14、 FOR THIS STANDARD. SEE www.eAuditN FOR CURRENT QPL ON-LINE. AEROSPACE STANDARD AS5355/3 SHEET 3 OF 3 REV. B COUPLINGS, CLAMP, GROOVED, V-BAND, 1.75 TO 14.25 FLANGE OD (-65 TO 1200 F) /4/ DOUBLE LATCH COUPLINGS (TYPE BR AND TYPE BRL) ARE AVAILABLE FOR ONLY SIZES 21 AND UP. THE NUMBER OF RETAINERS PE
15、R COUPLING AND THEIR POSITION IS DEPENDENT ON THE SIZE OF THE COUPLING AND THE LATCH CONFIGURATION. 5. LATCH ELEMENTS ARE OPTIONAL WITHIN ENVELOPES SHOWN. 6. ENVELOPE DIMENSIONS APPLY WHEN THE COUPLING IS IN THE TIGHTENED CONDITION AT THE MAXIMUM AND MINIMUM POSITIONS OF ITS DIAMETRICAL RANGE. /7/ Q
16、UICK RELEASE LATCH COUPLING SHALL CONTAIN ONLY ONE QUICK RELEASE LATCH. /8/ MARKING: BY ELECTROCHEMICAL ETCHING PER AS478-7A2 OR LASER MARKING PER AS478-15A2. THE COUPLING SHALL BE MARKED WITH SUPPLIER IDENTIFICATION AND AS5355/3-XX PART NUMBER PER AS5355. 9. OPERATING TEMPERATURE: -65 TO 1200 F. 10
17、 BREAK EDGES .003 TO .015, UNLESS OTHERWISE SPECIFIED. 11. DIMENSIONING AND TOLERANCING: ASME Y14.5M-1994. 12. DIMENSIONS ARE IN INCHES. UNLESS OTHERWISE SPECIFIED, TOLERANCES: LINEAR DIMENSIONS .XXX = .010, .XX = .03, ANGULAR DIMENSIONS .5. 13. EXAMPLE OF PART NUMBER: 14. REVISION INDICATOR: A CHA
18、NGE BAR (I) LOCATED IN THE LEFT MARGIN IS FOR THE CONVENIENCE OF THE USER IN LOCATING AREAS WHERE TECHNICAL REVISIONS, NOT EDITORIAL CHANGES, HAVE BEEN MADE TO THE PREVIOUS ISSUE OF THIS DOCUMENT. AN (R) SYMBOL TO THE LEFT OF THE DOCUMENT TITLE INDICATES A COMPLETE REVISION OF THE DOCUMENT, INCLUDIN
19、G TECHNICAL REVISIONS. CHANGE BARS AND (R) ARE NOT USED IN ORIGINAL PUBLICATIONS, NOR IN DOCUMENTS THAT CONTAIN EDITORIAL CHANGES ONLY. AS5355/3-01 B B = BASIC T-BOLT LATCH COUPLING R = QUICK RELEASE LATCH COUPLING BR = BASIC T-BOLT AND QUICK RELEASE LATCH COUPLING SIZE CODE (FLANGE OD = 1.75) BASIC PART NUMBER
