1、SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising theref
2、rom, is the sole responsibility of the user.” SAE reviews each technical report at least every five years at which time it may be revised, reaffirmed, stabilized, or cancelled. SAE invites your written comments and suggestions.Copyright 2012 SAE International All rights reserved. No part of this pub
3、lication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970
4、outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.orgSAE values your input. To provide feedback on this Technical Report, please visit http:/www.sae.org/technical/standards/AS871BAEROSPACESTANDARDAS871 REV. B Issued 1965-01 Revised 2001-10 Reaffirmed 2012-1
5、1 Superseding AS871A Manufacturing and Inspection Standards for Preformed Packings (O-Rings) RATIONALEAS871B has been reaffirmed to comply with the SAE five-year review policy. SAE AS871B Page 2 of 16 SAE AS871B Page 3 of 16 SAE AS871B Page 4 of 16 SAE AS871B Page 5 of 16 SAE AS871B Page 6 of 16 SAE AS871B Page 7 of 16 SAE AS871B Page 8 of 16 SAE AS871B Page 9 of 16 SAE AS871B Page 10 of 16 SAE AS871B Page 11 of 16 SAE AS871B Page 12 of 16 SAE AS871B Page 13 of 16 SAE AS871B Page 14 of 16 SAE AS871B Page 15 of 16 SAE AS871B Page 16 of 16
