1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA
2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any
3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. SCHEDULE SECTION : SABS 0120 : Part 4 Section HC-1988 Corrosion protection of structural steelwork PART 4 : TYPICAL SCHEDULE OF QUANCLTIES sewIo tic CO W
4、ENPS CORROSION PROTECTION OF STRUCTURAL STEELWORK June 1988 Approved by the COUNCIL OF THE SOUTH AFRICAN BUREAU OF STANDARDS Page Number 1 SABS 0120 : Part 4 Sec t ion HC-1988 Corrosion protection of structural steelwork NOTE: See Clause 5 of the Introduction. Item No. Payment refers SABS 1200 HC 8.
5、2.1 8.2.2 8.2.3 B. 2.4 Short description SECTION : CORROSION PROTECTION OF STRETiRAL STEELWORK - Steelwork included under Items 1 to . . . inclusive, of Section . . . : (Supply, Fabrication and Erection) SURFACE DRESSING AND REPAIRS AT PLACE OF FABRICATION - Remove slag and weld spatter, grind welds
6、 to smooth profile, radius sharp edges as specified. TRANSPORT. Transport to and from coating shop and allow for dunnage (if applicable). SURFACE PREPARATION AND COATING LPPLICATION Shopwork. Prepare surface and apply coat(s) as specified. Hot-rolled sections Cold-formed sections Floor plates (paint
7、ed area) Handrailing (including knee rail and stanchions) Kickplates Bolts and nuts Other Sitework. Clean down surfaces, touch up damaged shop - coats and apply finlsh coats as specified. Hot-rolled sections Cold-formed sections Floor plates (painted area) Handrailing (including knee rail and stanchions) Kickplates Bolts and nuts Other Tonnage shall be gross quantities inclusive OF unpainted steel (e.g. embedded portions and under- side of baseplates, etc. ), not crane rails. SITE ESTABLISZ. Establishsent and disestablistiment (if applicable). Unit Rate Amount
