1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA
2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any
3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ISBN 978-0-626-21155-4 SANS 1118-4:2008Edition 3.2Any reference to SANS 1118-4 is deemedto be a reference to this standard(Government Notice No. 1373 of
4、8 November 2002)SOUTH AFRICAN NATIONAL STANDARD School clothing Part 4: Shirts Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 012 428 7911 fax: 012 344 1568 international code + 27 12 www.stansa.co.za Standards South Africa SANS 1118-4:2008 Editi
5、on 3.2 Table of changes Change No. Date Scope Amdt 1 2000 Amended to delete a reference and to align this part of SABS 1118 with the latest edition of SABS 1118-1. Amdt 2 2008 Amended to change the designation of SABS standards to SANS standards, to replace table 1 with a new size chart and to corre
6、ct a cross reference. Foreword This South African standard was approved by National Committee StanSA SC 5110.05B, Clothing and made-up articles School clothing, in accordance with procedures of Standards South Africa, in compliance with annex 3 of the WTO/TBT agreement. This document was published i
7、n February 2008. This document supersedes SABS 1118-4:2000 (edition 3.1). A vertical line in the margin shows where the text has been technically modified by amendment No. 2. Annex A forms an integral part of this document. SANS 1118 consists of the following parts under the general title School clo
8、thing: Part 1: General requirements for school clothing. Part 2: Blazers. Part 3: Trousers and shorts. Part 4: Shirts. Part 5: Deleted by amendment No. 1. Part 6: Dresses, tunics and gyms. Part 7: Girls slacks and skirts. Part 9: Knee-high stockings and ankle socks. Part 10: Jerseys and cardigans. P
9、art 11: Briefs. Part 12: Tracksuits. Part 13: Athletic wear. SANS 1118-4:2008 Edition 3.2 1 Contents Page Foreword 1 Scope . 3 2 Normative reference 3 3 Definitions 3 4 Materials . 3 5 Style, size and make 4 6 Packing, care-labelling and marking 6 7 Inspection . 6 Annex A (normative) Notes to purcha
10、sers 7 SANS 1118-4:2008 Edition 3.2 2 This page is intentionally left blank SANS 1118-4:2008 Edition 3.2 3 School clothing Part 4: Shirts 1 Scope This part of SANS 1118 specifies the materials, cut, make and trim of shirts for boys and girls. 2 Normative reference The following standards contain pro
11、visions which, through reference in this text, constitute provisions of this part of SANS 1118. All standards are subject to revision and, since any reference to a standard is deemed to be a reference to the latest edition of that standard, parties to agreements based on this part of SANS 1118 are e
12、ncouraged to take steps to ensure the use of the most recent editions of the standards indicated below. Information on currently valid national and international standards can be obtained from Standards South Africa. SANS 1118-1, School clothing Part 1: General requirements for school clothing. 3 De
13、finitions For the purposes of this part of SANS 1118, the definitions given in SANS 1118-1 and the following definition apply. size designation the numerical value, in centimetres, of the circumference of the neck of the intended wearer 4 Materials 4.1 Outer material The outer material shall be of t
14、he required fabric that complies with the relevant requirements given in table 1 of SANS 1118-1. (The note to 4.1 of SANS 1118-1 shall also apply.) The colour(s) of the dyed fabric shall be an acceptable match to the required colour(s) as agreed upon between the purchaser and the supplier. Amdt 1 4.
15、2 Supplementary materials and components The supplementary materials and components shall comply with the relevant requirements laid down in 4.2 of SANS 1118-1. Amdt 1 SANS 1118-4:2008 Edition 3.2 4 5 Style, size and make 5.1 Style The shirts shall be for boys or for girls, as required, shall be of
16、a jacket style with open fronts, and shall be of one of the types described below, as required. 5.1.1 Tie (lounge) type (always worn with a tie) The collar shall be semi-stiff with stand and fall. The bottom of the shirt may be straight or shaped, as required, provided the front length equals the ba
17、ck length measurements given in table 1. The sleeves shall be long. 5.1.2 Dual-purpose type (worn with a tie or as an open-neck shirt) The collar shall be a one-piece sports type collar with point stiffeners. The bottom of the shirt shall be straight. The shirt may have long or short sleeves, as req
18、uired. 5.1.3 Sports type (open-neck shirt) The collar shall be a one-piece sports type collar. The bottom of the shirt shall be straight. The sleeves shall be short. 5.2 Size The shirts shall be supplied in one (or more) of the size designations given in column 2 of table 1, as required, and their m
19、easurements, determined in accordance with 6.2 of SANS 1118-1, shall conform to the appropriate values given in columns 3 to 9 (inclusive). Amdt 1; amdt 2 Table 1 Size range for shirts Dimensions in centimetres 1 2 3 4 5 6 7 8 9 Finished garment measurements Sleeve length Cuff Age Size designation C
20、ollar length Chest/ bust Back length Long Short Length Width 4 5-6 6-7 27 29 30 28 30 31 72 80 84 47 53 55 55 59 62 6 7 7 18 18 18 6 6 6 7-8 8-9 9-10 31 32 33 32 33 34 86 90 94 58 59 61 66 67 68 7 8 8 20 20 20 6 6 6 11 12 14 34 35 36 35 36 37 96 98 102 65 66 68 73 74 82 8 10 12 20 23 23 6 6 6 14H 15
21、 15H 37 38 39 38 39 40 106 110 114 71 72 74 85 85 87 13 14 15 23 23 26 6 6 6 16 16H 17 41 42 43 42 43 44 118 120 122 76 76 76 90 91 92 15 15 15 26 26 26 6 6 6 17H 18 44 45 45 46 124 126 76 76 93 94 15 15 26 26 6 6 Amdt 2 SANS 1118-4:2008 Edition 3.2 5 5.3 Make 5.3.1 General The relevant requirements
22、 for garments given in 4.3 of SANS 1118-1 shall apply. Amdt 1 5.3.2 Fronts The fronts shall be plain. The left front shall have a patch pocket and the front edges shall be as described in 5.3.2.1 or 5.3.2.2, as relevant. The buttonholes and buttons shall be equidistantly spaced at positions 15 mm fr
23、om the front edges. 5.3.2.1 Tie type The facings shall be grown on and of finished width at least 30 mm, and may be cut with the selvedge. Laid-on fronts shall have a width of at least 30 mm. 5.3.2.2 Dual-purpose and sports type The front edge shall fold to the neck point; the turn-in shall be at le
24、ast 70 mm wide at the bottom, and may be cut with the selvedge. 5.3.3 Backs The backs shall be plain and may have a double yoke at the shoulders. 5.3.4 Collars 5.3.4.1 Tie type and dual-purpose type The collar shall be top fused with fusible interlining (see 4.2.1 of SANS 1118-1). Amdt 1 5.3.4.2 Spo
25、rts type The collar shall be top fused with fusible interlining or, alternatively, interlined with a fully shrunk interlining (see 4.2.1 of SANS 1118-1). Amdt 2 5.3.5 Sleeves 5.3.5.1 Long sleeves The sleeves shall have a single cuff lined with outer material and interlined with fusible interlining o
26、r, alternatively, interlined with a fully shrunk interlining (see 4.2.1 of SANS 1118-1). The cuff shall fasten with a button and buttonhole. Amdt 1 5.3.5.2 Short sleeves Short sleeves shall have a hem of finished width at least 20 mm. 5.3.6 Pockets Pockets shall be of the patch type, turned in, hemm
27、ed (see 5.3.8), and securely tacked at each end of the mouth. SANS 1118-4:2008 Edition 3.2 6 5.3.7 Buttonholes All buttonholes shall be of the shirt type with a bar at each end, and of such length as to acceptably accommodate the relevant buttons. 5.3.8 Seams Seams shall be of the safety stitch type
28、 or of the lapped (double-needle) type. All exposed edges shall be overlocked, or turned in and stitched down. 6 Packing, care-labelling and marking The requirements of clause 5 of SANS 1118-1 shall apply. Amdt 1 7 Inspection Inspection shall be done in accordance with clause 6 of SANS 1118-1. Amdt
29、1 SANS 1118-4:2008 Edition 3.2 7 Annex A (normative) Notes to purchasers The following requirements shall be specified in tender invitations and in each order or contract: a) the type and colour(s) of the outer material (see 4.1); b) whether the shirts are for boys or for girls (see 5.1); c) the typ
30、e of shirt (see 5.1); d) in the case of tie type shirts, whether the bottoms shall be straight or shaped (see 5.1.1); e) in the case of dual-purpose type shirts, whether long or short sleeves are required (see 5.1.2); f) the size designation(s) required (see 5.2); and g) in the case of tie type shirts, whether front edges shall be grown on or laid on (see 5.3.2.1). Standards South Africa
