SANS 1545-7-2007 Safety rules for the construction and installation of lifts Part 7 Electric and hydraulic service lifts (dumb waiters)《升降机施工和安装安全规程 第7部分：电动和液压货物升降机（轻型货物升降机）》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM E1918-2006(2015) Standard Test Method for Measuring Solar Reflectance of Horizontal and Low-Sloped Surfaces in the Field《现场测量水平和低斜表面太阳反射性的标准试验方法》.pdf

ASTM E1918-2016 Standard Test Method for Measuring Solar Reflectance of Horizontal and Low-Sloped Surfaces in the Field《现场测量水平面和低斜度表面太阳反射率的标准试验方法》.pdf

ASTM E1919-2007 Standard Guide for Worldwide Published Standards Relating to Particle and Spray Characterization《与颗粒和喷雾特征相关的世界范围公布标准的标准指南》.pdf

ASTM E1920-2003 Standard Guide for Metallographic Preparation of Thermal Sprayed Coatings《热喷涂层的金相制备用标准指南》.pdf

ASTM E1920-2003(2008) Standard Guide for Metallographic Preparation of Thermal Sprayed Coatings《热喷涂层的金相制备用标准指南》.pdf

ASTM E1920-2003(2014) Standard Guide for Metallographic Preparation of Thermal Sprayed Coatings《热喷涂层的金相制备用标准指南》.pdf

ASTM E1921-2005 Standard Test Method for Determination of Reference Temperature To for Ferritic Steels in the Transition Range《测定铁素体钢在转变范围内基准温度To的标准试验方法》.pdf

ASTM E1921-2007 Standard Test Method for Determination of Reference Temperature To for Ferritic Steels in the Transition Range.pdf

ASTM E1921-2008 Standard Test Method for Determination of Reference Temperature To for Ferritic Steels in the Transition Range.pdf