SANS 1700-13-7-1996 Fasteners Part 13 Tapping screws Section 7 Cross recessed raised countersunk (oval) head tapping screws《紧固件 第13部分：自攻螺钉 第7节：开槽半沉头自攻螺钉》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 8327-1982 Label for watches and clocks《手表和时钟的标签》.pdf

DIN 8328-3-1984 Numbering of watches and clocks energy supply winding mechanism oscillating system protective measures and additional functions《钟表的编号 电源、发条机构、摆振系统、保护措施和附加功能》.pdf

DIN 8330-1-2016 Horology - Aviator watches - Part 1 Requirements and tests《钟表 飞行员手表 第1部分 要求和试验》.pdf

DIN 8330-2-2016 Horology - Aviator watches - Part 2 Evaluation of conformity《钟表 飞行员手表 第2部分 合格评定》.pdf

DIN 8349-1988 Files and rasps numbers of cuts《锉和粗锉 锉齿数量》.pdf

DIN 835-2010 Studs - Metal end 2 d《双头螺栓 旋入端（约）2d》.pdf

DIN 8350-1995 Scrapers《刮刀》.pdf

DIN 837-2007 Box wrenches double head for subordinate applications - Dimensions and test torques《带次级用双头的梅花扳手 尺寸和检验扭矩》.pdf

DIN 8374-2006 Subland twist drills with parallel shank for clearance holes and countersinks for countersunk head screws《沉头螺钉安装沉孔和通孔用的带平行钻柄的多刃阶梯麻花钻》.pdf