SANS 20043-2005 Uniform provisions concerning the approval of safety glazing materials and their installation on vehicles《关于安全玻璃材料及其在车辆上安装的批准的统一规定》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM E1221-2012 Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness KIa of Ferritic Steels《测定KIa铁素体钢的平面应变 断裂抑制 破裂韧性的标准试验方法》.pdf

ASTM E1221-2012a Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness KIa of Ferritic Steels《测定Kla铁素体钢的平面应变 断裂抑制 破裂韧性的标准试验方法》.pdf

ASTM E1222-1990(2002) Standard Test Method for Laboratory Measurement of the Insertion Loss of Pipe Lagging Systems《管子护套装置安放损耗的实验室测量用试验方法》.pdf

ASTM E1222-1990(2009) Standard Test Method for Laboratory Measurement of the Insertion Loss of Pipe Lagging Systems《管子护套装置介入损耗的实验室测量的标准试验方法》.pdf

ASTM E1222-1990(2016) Standard Test Method for Laboratory Measurement of the Insertion Loss of Pipe Lagging Systems《管道滞后系统插入损失的实验室测量的标准试验方法》.pdf

ASTM E1225-2004 Standard Test Method for Thermal Conductivity of Solids by Means of the Guarded-Comparative-Longitudinal Heat Flow Technique《通过隔绝-比较-轴向热流技术测定固体导热性的标准试验方法》.pdf

ASTM E1225-2009 Standard Test Method for Thermal Conductivity of Solids by Means of the Guarded-Comparative-Longitudinal Heat Flow Technique《通过隔绝-比较-轴向热流技术测定固体导热性的标准试验方法》.pdf

ASTM E1225-2013 Standard Test Method for Thermal Conductivity of Solids Using the Guarded-Comparative-Longitudinal Heat Flow Technique《采用隔绝-比较-轴向热流技术测定固体导热性的标准试验方法》.pdf

ASTM E1226-2005 Standard Test Method for Pressure and Rate of Pressure Rise for Combustible Dusts《可燃粉尘用压力和压力提高率的标准试验方法》.pdf