1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA
2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any
3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ISBN 978-0-626-22551-3 SANS 24729-1:2009 Edition 1 ISO/IEC TR 24729-1:2008 Edition 1 SOUTH AFRICAN NATIONAL STANDARD Information technology Radio frequen
4、cy identification for item management Implementation guidelines Part 1: RFID enabled labels and packaging supporting ISO/IEC 18000-6C This national standard is the identical implementation of ISO/IEC TR 24729-1:2008, and is adopted with the permission of the International Electrotechnical Commission
5、. Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12 428 7911 Fax: +27 12 344 1568 www.sabs.co.za SABS This standard may only be used and printed by approved subscription and freemailing clients of the SABS. SANS 24729-1:2009 Edition 1 ISO/IE
6、C TR 24729-1:2008 Edition 1 Table of changes Change No. Date Scope National foreword This South African standard was approved by National Committee SABS TC 71K, Information technology Automatic identification and data capture techniques, in accordance with procedures of the SABS Standards Division,
7、in compliance with annex 3 of the WTO/TBT agreement. This SANS document was published in April 2009. This standard may only be used and printed by approved subscription and freemailing clients of the SABS. Reference number ISO/IEC TR 24729-1:2008(E) ISO/IEC 2008TECHNICAL REPORT ISO/IEC TR 24729-1 Fi
8、rst edition 2008-04-15Information technology Radio frequency identification for item management Implementation guidelines Part 1: RFID-enabled labels and packaging supporting ISO/IEC 18000-6C Technologies de linformation Identification radiofrquentielle de gestion darticle Lignes directrices de mise
9、 en application Partie 1: tiquettes adaptes RFID et emballage contenant lISO/CEI 18000-6C SANS 24729-1:2009This standard may only be used and printed by approved subscription and freemailing clients of the SABS.iii Contents Page Foreword vii Introduction viii 1 Scope . 1 2 Normative references 1 3 T
10、erms and definitions . 3 4 Passive RFID transponder selection 4 4.1 General . 4 4.2 Passive UHF transponder frequency considerations 4 4.3 UHF transponder design factors . 5 4.4 Transponder life and failure modes 5 4.4.1 Flexure and minimum bending radius of the passive RFID transponders media 5 4.4
11、.2 Environmental considerations 5 5 Media incorporating passive RFID transponders 5 5.1 General. 5 5.2 Media configurations . 6 5.2.1 Pressure-sensitive labels. 6 5.2.2 Dry-gum (water-activated) adhesive labels. 6 5.2.3 Passive RFID transponders tickets used in carrier envelopes . 6 5.2.4 Tie-on tag
12、s 6 5.3 Environmental considerations in media design . 6 5.3.1 General 6 5.3.2 Operating and storage temperature ranges of applied passive RFID transponders labels. 7 5.3.3 Storage of media incorporating passive RFID . 7 5.4 Media printable facestocks. 7 5.5 Printing method and ink compatibility . 7
13、 5.6 Permanent label and inlay adhesives . 7 5.6.1 General 7 5.6.2 Adhesive RF properties and transponder compatibility. 8 5.6.3 Hygroscopic adhesives 8 5.7 Removable label adhesives 8 5.8 Release liners (backing) for pressure-sensitive labels and inlays 8 5.8.1 Purpose . 8 5.8.2 Adhesive compatibil
14、ity and release level 8 ISO/IEC TR 24729-1:2008(E) ISO/IEC 2008 All rights reserved SANS 24729-1:2009This standard may only be used and printed by approved subscription and freemailing clients of the SABS.iv 5.8.3 Removing the passive RFID transponders label and inlays from the release liner .8 5.8.
15、4 RF properties of release liners.9 5.9 Avoiding electrostatic discharge (ESD) 9 5.9.1 Overview 9 5.9.2 Peeling as a source of static electricity9 5.9.3 Conveyors as sources of static electricity . 10 5.9.4 ESD compliance testing . 10 5.9.5 Printer-encoder considerations 10 6 Printing and encoding l
16、abels with passive RFID transponders 10 6.1 Printing methods 10 6.2 Label edge start sensing issues 11 6.3 Encoding and/or verifying transponder data 11 6.4 Dealing with defective transponders 11 7 Placement and attachment of media and inlay with passive RFID transponders 11 7.1 RF influence of the
17、transport unit and its contents on the transponder . 11 7.2 Visual inspection method for determining label or inlay placement 12 7.3 Transponders for objects primarily acting as RF reflectors 13 7.4 Transponders for objects primarily acting as RF absorbers . 14 7.5 Some common packaging problems 14
18、8 RFID labelling of conveyable cases and containers . 15 8.1 Overviews 15 8.2 Definition of a conveyable object 15 8.2.1 Transport units 16 8.2.2 Reusable plastic totes, delivery trays, etc 17 8.2.3 Other conveyable goods 17 8.3 RFID reader assumptions . 17 8.4 Label format and transponder data stru
19、cture. 17 8.4.1 Printed label format. 17 8.4.2 ISO data structures . 18 8.4.3 EPCglobal data structures. 18 8.4.4 Use and reuse of transport unit transponders. 19 8.5 Use of multiple passive RFID transponders 19 8.5.1 Use of multiple passive ISO RFID transponders . 19 8.5.2 Use of multiple passive E
20、PC RFID transponders 20 9 Passive RFID transponders and labelling of palletized unit loads . 20 9.1 Overview 20 9.2 RFID reader assumptions . 20 9.2.1 Portal readers. 20 ISO/IEC TR 24729-1:2008(E) ISO/IEC 2008 All rights reserved SANS 24729-1:2009This standard may only be used and printed by approve
21、d subscription and freemailing clients of the SABS.v 9.2.2 Forklift-mounted readers 21 9.2.3 Pallet conveyor readers 21 9.2.4 Handheld readers 21 9.3 Passive RFID transponders label usage and placement on pallet unit loads . 21 9.3.1 General rules for unit load passive RFID transponders label locati
22、on 21 9.3.2 General rules for active RFID transponders used on returnable transport items (RTIs) 22 9.3.3 Transponder data structure. 22 9.3.4 Wooden and plastic pallets 23 9.3.5 Special considerations for bin, cage, and tub pallet containers. 23 9.4 Permanent RFID transponders on pallets compliant
23、to ISO 17364. 23 9.5 Permanent RFID transponders on pallets compliant to EPCglobal 24 10 Non-conveyable and non-palletized materiel . 24 10.1 General. 24 10.2 RFID reader assumptions. 24 10.3 Guidelines for some common types of objects and transport units 24 10.4 Label printed format and transponder
24、 data structure. 25 10.5 Use of multiple passive RFID transponders 25 11 Representing EPCglobal data structures in bar codes 25 11.1 Unique Item Identifier (UII) representation 25 11.1.1 Background 25 11.1.2 Recommended representations . 25 11.1.3 Bar code Application Identifiers and Data Identifier
25、 needs. 26 11.1.4 Flag Character . 27 11.1.5 EPCglobal tag data memory organization 28 11.2 EPCglobal UHF Gen 2 bar code backup of binary UII data. 29 11.2.1 EPCglobal UHF Gen 2 data memory organization 29 11.2.2 Full backup of UHF Gen 2 binary UII data structures. 30 11.2.3 Supplemental Backup of U
26、HF Gen 2 binary UII data structures 30 11.3 Optional backup of Gen 2 mixed binary/alphanumeric UII data 31 11.4 Regenerating or updating RFID-enabled labels . 32 11.4.1 Regenerating failed tags 32 11.4.2 Use of the tag identification field (TID) 32 11.4.3 Modified UII data structure 33 11.4.4 Replac
27、ing bad RFID enabled labels. 33 12 Human readable interpretation (HRI) backup. 33 12.1 Need for HRI 33 12.2 Manual data entry considerations. 33 12.3 HRI for EPCglobal UHF Gen 2 UII data . 34 ISO/IEC TR 24729-1:2008(E) ISO/IEC 2008 All rights reserved SANS 24729-1:2009This standard may only be used
28、and printed by approved subscription and freemailing clients of the SABS.vi 13 Data for bar code and human readable backup examples 34 13.1 SGTIN-96 example . 34 13.2 UHF Gen 2 tag backup 35 14 Linear bar code recommendation 36 14.1 General. 36 14.2 UHF Gen 2 backup using GS1-128 bar codes. 36 14.2.
29、1 Full Backup of UHF Gen 2 UII data 36 14.2.2 Supplemental Backup of UHF Gen 2 UII data 37 14.3 Partial backup. 39 14.4 Linear bar code printing recommendations 39 15 Two-dimensional bar code symbol backup 39 15.1 GS1 supported symbologies . 39 15.1.1 Use of Data Matrix. 39 15.1.2 Use of EAN.UCC Com
30、posite . 40 15.2 Other ISO/IEC 2D symbologies . 40 15.3 The Military Shipping Label . 40 Annex A (informative) Design terms for passive RFID transponders inlays or labels . 41 Annex B (informative) AIM RFID Emblem for passive RFID transponders. 43 Annex C (informative) Optimizing passive RFID transp
31、onders placement 45 Annex D (informative) UHF Gen 2 tag data memory map . 53 Annex E (informative) ISO/IEC 18000-6c tags, ASCII, and AFIs 55 Annex F (informative) Recovering the UII from pre-existing bar codes 57 Annex G (informative) Summary and Examples 59 Bibliography 61 ISO/IEC TR 24729-1:2008(E
32、) ISO/IEC 2008 All rights reserved SANS 24729-1:2009This standard may only be used and printed by approved subscription and freemailing clients of the SABS.ISO/IEC TR 24729-1:2008(E) ISO/IEC 2008 All rights reserved vii Foreword ISO (the International Organization for Standardization) and IEC (the I
33、nternational Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particula
34、r fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have establish
35、ed a joint technical committee, ISO/IEC JTC 1. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of the joint technical committee is to prepare International Standards. Draft International Standards adopted by the joint technical
36、committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote. In exceptional circumstances, the joint technical committee may propose the publication of a Technical Report of one of the follo
37、wing types: type 1, when the required support cannot be obtained for the publication of an International Standard, despite repeated efforts; type 2, when the subject is still under technical development or where for any other reason there is the future but not immediate possibility of an agreement o
38、n an International Standard; type 3, when the joint technical committee has collected data of a different kind from that which is normally published as an International Standard (“state of the art”, for example). Technical Reports of types 1 and 2 are subject to review within three years of publicat
39、ion, to decide whether they can be transformed into International Standards. Technical Reports of type 3 do not necessarily have to be reviewed until the data they provide are considered to be no longer valid or useful. Attention is drawn to the possibility that some of the elements of this document
40、 may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. ISO/IEC TR 24729-1, which is a Technical Report of type 2, was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 31, Automatic ide
41、ntification and data capture techniques. ISO/IEC TR 24729 consists of the following parts, under the general title Information technology Radio frequency identification for item management Implementation guidelines: Part 1: RFID-enabled labels and packaging supporting ISO/IEC 18000-6C Part 2: Recycl
42、ing and RFID tags SANS 24729-1:2009This standard may only be used and printed by approved subscription and freemailing clients of the SABS.viii Introduction The assumptions for this document are: 1. RFID transponders may be placed separately from human- and machine-readable labels or information on
43、to the transport unit or pallet. However, if RFID is to be supplied, it is important to have all three on the transport unit or pallet. 2. RFID transponders will increase in reliability therefore non-reads will be minimized. 3. ISO/IEC TR 24729-2 will describe the disposition of non-readable transpo
44、nders. The performance of RFID devices, particularly those operating at UHF frequencies (860-960 MHz) are strongly influenced by the construction of the RFID-enabled label, where it is applied to the object, and the RF characteristics of the underlying object or objects. In this regard, much more ca
45、re has to be taken in selection and placement of the RFID-enabled label on the object than with a conventional bar code label. This, in turn, requires the additional knowledge and practical guidelines for RFID-enabled label selection and usage provided herein. This Part of ISO/IEC TR 24729 provides
46、background, reference information, and practical knowledge in the selection and application of passive RFID transponders to transport units and pallets (see Layers 2 and 3 of Figure 1) used to move and distribute commercial packaged goods. This may be accomplished with inlays or conventional labels,
47、 tickets and tags with embedded or attached RFID transponders. This document does not address applications where the transponder is embedded in the container itself. ISO/IEC TR 24729-1:2008(E) ISO/IEC 2008 All rights reserved SANS 24729-1:2009This standard may only be used and printed by approved su
48、bscription and freemailing clients of the SABS.1 1 ScopeOne type of RFID referred to within this document is the EPCglobal Class 1 Generation 2 technology. The “Class” structure originally embraced by EPCglobal has, for the most part, been overtaken by events. Consequently, this technology may be re
49、ferred to as UHF Gen 2 or by its ISO designation, ISO/IEC 18000, Part 6C. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO/IEC 646, Information technology ISO 7-bit coded character set for information interchange ISO/IEC 13239, Information technology Telecommunications and information exchange b
