SANS 581-2007 Semi-flexible vinyl floor tiles《半柔性乙稀基铺地砖》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

HB 683-1992 加工轻合金用焊硬质合金刀片的镶齿套式面铣刀.D=250～315mm.pdf

HB 686-1992 两面刃铣刀.D=63～125mm.pdf

HB 687-1992 镶齿两面刃铣刀.D=80～315mm.pdf

HB 688-1992 加工轻合金用镶齿两面刃铣刀.D=80～315mm.pdf

HB 689-1992 直齿三面刃铣刀.D=50～200mm.pdf

HB 690-1992 错齿三面刃铣刀.D=50～200mm.pdf

HB 691-1992 加工深槽用错齿三面刃铣刀.D=80～200mm.pdf

HB 692-1992 加工轻合金用错齿三面刃铣刀.D=63～100mm.pdf

HB 693-1992 镶齿三面刃铣刀.D=80～200mm.pdf