1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA
2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any
3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ISBN 978-0-626-22874-3 SANS 60335-2-85:2009Edition 2.1IEC 60335-2-85:2008Edition 2.1SOUTH AFRICAN NATIONAL STANDARD Household and similar electrical appl
4、iances Safety Part 2-85: Particular requirements for fabric steamers This national standard is the identical implementation of IEC 60335-2-85:2008 and is adopted with the permission of the International Electrotechnical Commission. WARNING Can only be used in conjunction with SANS 60335-1. Published
5、 by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001Tel: +27 12 428 7911 Fax: +27 12 344 1568 www.sabs.co.za SABS SANS 60335-2-85:2009 Edition 2.1 IEC 60335-2-85:2008 Edition 2.1 Table of changes Change No. Date Scope IEC amdt 1 2008 Amended to add to the introduct
6、ion, to add a cautionary statement regarding challenged persons including children, and to add a referenced standard to the bibliography. National foreword This South African standard was approved by National Committee SABS TC 72, Safety of electrical appliances and electronic equipment, in accordan
7、ce with procedures of the SABS Standards Division, in compliance with annex 3 of the WTO/TBT agreement. This SANS document, by reference, forms part of the Compulsory specification for electrical and electronic apparatus, as published by Government Notice No R. 89 (Government Gazette 31844) of 6 Feb
8、ruary 2009. This SANS document was published in August 2009. This SANS document supersedes SANS 60335-2-85:2003 (edition 2). IEC 60335-2-85Edition 2.1 2008-07INTERNATIONAL STANDARD NORME INTERNATIONALEHousehold and similar electrical appliances Safety Part 2-85: Particular requirements for fabric st
9、eamers Appareils lectrodomestiques et analogues Scurit Partie 2-85: Rgles particulires pour les appareils vapeur pour tissus INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE CBICS 97.060 PRICE CODECODE PRIXISBN 2-8318-9762-9 Registered trademark of the Internation
10、al Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale SANS 60335-2-85:2009This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS . 2 60335-2-85 IEC:2002+A1:2008 CONTENTS FOREWORD.3 INTRODUCTION.5 1 Scope.6 2 Nor
11、mative references .6 3 Definitions 6 4 General requirement.7 5 General conditions for the tests 7 6 Classification7 7 Marking and instructions.7 8 Protection against access to live parts8 9 Starting of motor-operated appliances 8 10 Power input and current .8 11 Heating 8 12 Void9 13 Leakage current
12、 and electric strength at operating temperature9 14 Transient overvoltages .9 15 Moisture resistance 9 16 Leakage current and electric strength.9 17 Overload protection of transformers and associated circuits .9 18 Endurance9 19 Abnormal operation 9 20 Stability and mechanical hazards .10 21 Mechani
13、cal strength .10 22 Construction.10 23 Internal wiring.11 24 Components .11 25 Supply connection and external flexible cords 11 26 Terminals for external conductors.11 27 Provision for earthing .11 28 Screws and connections.11 29 Clearances, creepage distances and solid insulation 11 30 Resistance t
14、o heat and fire.12 31 Resistance to rusting12 32 Radiation, toxicity and similar hazards12 Annexes .13 Bibliography13 SANS 60335-2-85:2009This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .60335-2-85 IEC:2002+A1.2008 3 INTERNATIONAL ELECTROTECHN
15、ICAL COMMISSION _ HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES SAFETY Part 2-85: Particular requirements for fabric steamers FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC Nationa
16、l Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly
17、 Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-government
18、al organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on tec
19、hnical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by
20、IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international unif
21、ormity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5)
22、 IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its director
23、s, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising ou
24、t of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn
25、to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. This part of International Standard IEC 60335 has been prepared by IEC technical committee 61: Safety of househol
26、d and similar electrical appliances. This consolidated version of IEC 60335-2-85 consists of the second edition (2002) documents 61/2228/FDIS and 61/2303/RVD and its amendment 1 (2008) documents 61/3537/FDIS and 61/3589/RVD. The technical content is therefore identical to the base edition and its am
27、endment and has been prepared for user convenience. It bears the edition number 2.1. A vertical line in the margin shows where the base publication has been modified by amendment 1. The French version of this standard has not been voted upon. SANS 60335-2-85:2009This s tandard may only be used and p
28、rinted by approved subscription and freemailing clients of the SABS . 4 60335-2-85 IEC:2002+A1:2008 This part 2 is to be used in conjunction with the latest edition of IEC 60335-1 and its amendments. It was established on the basis of the fourth edition (2001) of that standard. NOTE 1 When “Part 1”
29、is mentioned in this standard, it refers to IEC 60335-1. This part 2 supplements or modifies the corresponding clauses in IEC 60335-1, so as to convert that publication into the IEC standard: Safety requirements for electric fabric steamers. When a particular subclause of Part 1 is not mentioned in
30、this part 2, that subclause applies as far as is reasonable. When this standard states “addition”, “modification” or “replacement”, the relevant text in Part 1 is to be adapted accordingly. NOTE 2 The following numbering system is used: subclauses, tables and figures that are numbered starting from
31、101 are additional to those in Part 1; unless notes are in a new subclause or involve notes in Part 1, they are numbered starting from 101, including those in a replaced clause or subclause; additional annexes are lettered AA, BB, etc. NOTE 3 The following print types are used: requirements: in roma
32、n type; test specifications: in italic type; notes: in small roman type. Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and the associated noun are also in bold. The following differences exist in the countries indicated below. Clause 1: Ele
33、ctrode-type appliances and appliances with bare heating elements are only allowed if they are for permanent connection to fixed wiring (Netherlands). 6.1: Class 0 electrode-type appliances are allowed (USA). 7.12: The instructions shall state that only demineralized water or distilled water is to be
34、 used (Denmark). 13.2: The additional measurement is not carried out (USA). 19.2: The test is different (USA). The committee has decided that the contents of the base publication and its amendments will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/web
35、store.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. NOTE 4 The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a t
36、ransitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of the amendment 1 be adopte
37、d for implementation nationally not earlier than 12 months or later than 36 months from the date of publication. SANS 60335-2-85:2009This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .60335-2-85 IEC:2002+A1.2008 5 INTRODUCTION It has been assume
38、d in the drafting of this International Standard that the execution of its provisions is entrusted to appropriately qualified and experienced persons. This standard recognizes the internationally accepted level of protection against hazards such as electrical, mechanical, thermal, fire and radiation
39、 of appliances when operated as in normal use taking into account the manufacturers instructions. It also covers abnormal situations that can be expected in practice and takes into account the way in which electromagnetic phenomena can affect the safe operation of appliances. This standard takes int
40、o account the requirements of IEC 60364 as far as possible so that there is compatibility with the wiring rules when the appliance is connected to the supply mains. However, national wiring rules may differ. If an appliance within the scope of this standard also incorporates functions that are cover
41、ed by another part 2 of IEC 60335, the relevant part 2 is applied to each function separately, as far as is reasonable. If applicable, the influence of one function on the other is taken into account. When a part 2 standard does not include additional requirements to cover hazards dealt with in Part
42、 1, Part 1 applies. NOTE 1 This means that the technical committees responsible for the part 2 standards have determined that it is not necessary to specify particular requirements for the appliance in question over and above the general requirements. This standard is a product family standard deali
43、ng with the safety of appliances and takes precedence over horizontal and generic standards covering the same subject. NOTE 2 Horizontal and generic standards covering a hazard are not applicable since they have been taken into consideration when developing the general and particular requirements fo
44、r the IEC 60335 series of standards. For example, in the case of temperature requirements for surfaces on many appliances, generic standards, such as ISO 13732-1 for hot surfaces, are not applicable in addition to Part 1 or part 2 standards. An appliance that complies with the text of this standard
45、will not necessarily be considered to comply with the safety principles of the standard if, when examined and tested, it is found to have other features that impair the level of safety covered by these requirements. An appliance employing materials or having forms of construction differing from thos
46、e detailed in the requirements of this standard may be examined and tested according to the intent of the requirements and, if found to be substantially equivalent, may be considered to comply with the standard. SANS 60335-2-85:2009This s tandard may only be used and printed by approved subscription
47、 and freemailing clients of the SABS . 6 60335-2-85 IEC:2002+A1:2008 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES SAFETY Part 2-85: Particular requirements for fabric steamers 1 Scope This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric fab
48、ric steamers intended for household and similar purposes, their rated voltage being not more than 250 V. Appliances not intended for normal household use, but that nevertheless may be a source of danger to the public, such as appliances intended to be used by laymen in shops, are within the scope of
49、 this standard. NOTE 101 Examples of such appliances are those for use in laundries and dry cleaners. As far as is practicable, this standard deals with the common hazards presented by appliances that are encountered by all persons in and around the home. However, in general, it does not take into account persons (including children) whose physical, sensory or mental capabilities; or lack of experience and knowledge prevents them from using the appliance safely without supervision o
