SANS 62310-2-2006 Static transfer systems (STS) Part 2 Electromagnetic compatibility (EMC) requirements《静态转换系统（STS） 第2部分：电磁兼容性（EMC）的要求》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

HB 4587-1992 加工轻合金二齿立铣刀用槽铣刀 D=30~75mm.pdf

HB 4588-1992 加工轻合金二齿立铣刀槽铣刀用样板和校对样板 检测HB 4587-92槽铣刀用.pdf

HB 4589-1992 加工轻合金二齿立铣刀用偏背刀 D=56~63mm.pdf

HB 459-2004 航空用结构钢焊条规范.pdf

HB 459.1-1984 HTJ-1焊条技术条件.pdf

HB 459.2-1984 HTJ-4焊条技术条件.pdf

HB 4590-1992 加工轻合金二齿立铣刀偏背刀用样板和校对校板 检测HB 4589-92槽铣刀用.pdf

HB 4591-1992 加工轻合金三齿立铣刀用槽铣刀 D=45~80mm.pdf

HB 4592-1992 加工轻合金三齿立铣刀槽铣刀用样板和校对样板 检测HB 4591-92槽铣刀用.pdf