SANS 70-2004 Conditioning of textiles and standard temperate atmosphere for determining their physical and mechanical properties《测定纺织品物理机械性能的纺织品调湿和标准温和环境》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN ISO 6507-1-2018 en Metallic Materials - Vickers Hardness Test - Part 1 Test Method.pdf

EN ISO 6507-2-2005 en Metallic materials - Vickers hardness test - Part 2 Verification and calibration of testing machines《金属材料 硬度试验 第2部分 硬度计的检验 ISO 6507-2-2005》.pdf

EN ISO 6507-2-2018 en Metallic materials - Vickers hardness test - Part 2 Verification and calibration of testing machines.pdf

EN ISO 6507-3-2005 en Metallic materials - Vickers hardness test - Part 3 Calibration of reference blocks《金属材料 维氏硬度试验 第3部分 标准块的校准 ISO 6507-3-2005》.pdf

EN ISO 6507-3-2018 en Metallic materials - Vickers hardness test - Part 3 Calibration of reference blocks.pdf

EN ISO 6507-4-2005 en Metallic materials - Vickers hardness test - Part 4 Tables and hardness values《金属材料 硬度试验 第4部分 硬度数值表 ISO 6507-4-2005》.pdf

EN ISO 6508-1-2016 en Metallic materials - Rockwell hardness test - Part 1 Test method《金属材料-罗克韦尔硬度试验第1部分 试验方法(ISO 6508-1 2016)》.pdf

EN ISO 6508-2-2015 en Metallic materials - Rockwell hardness test - Part 2 Verification and calibration of testing machines and indenters《金属材料 布氏硬度试验 第2部分 试验机和硬度计压头的检验和校准(ISO 6508-.pdf

EN ISO 6508-3-2015 en Metallic materials - Rockwell hardness test - Part 3 Calibration of reference blocks《金属材料 布氏硬度试验 第3部分 标准试块的校验(ISO 6508-3 2015)》.pdf