SFS 2544 《印刷标准换算表 迪多点制和十二点活字 毫米和相反地》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD ESK-M2G264-A3-2014 ADHESIVE PRIMER - ACRYLATE BASED - FOR ADHESIVE TAPE TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD ESK-M2G268-A-1994 ADHESIVE HOT MELT - ETHYLENE VINYL ACETATE BASE《乙烯-乙酸乙烯共聚物基热熔式胶粘剂》.pdf

FORD ESK-M2G269-A-1988 ADHESIVE STYRENE BUTADIENE HOT MELT FILLED《填充的型苯乙烯丁二烯热熔胶粘剂》.pdf

FORD ESK-M2G270-A-1988 ADHESIVE POLYAMIDE HOT MELT FILLED《填充型聚酰胺热熔胶粘剂》.pdf

FORD ESK-M2G287-A1-1994 ADHESIVE EPOXY - HEAT CURING EXCEPTION IN SOLIDS (PARA 3 1 3) MIN 97 0 %《固体物含量不低于97 0%（PARA 3 1 3）的热固化环氧树脂胶粘剂》.pdf

FORD ESK-M2G298-A1-1995 ADHESIVE SILICONE TWO COMPONENT《两组分硅树脂胶粘剂》.pdf

FORD ESK-M2G298-A2-1995 ADHESIVE SILICONE TWO COMPONENT (Shown on ESK-M2G298-A1)《两组分硅树脂胶粘剂 列于标准ESK-M2G298-A1上》.pdf

FORD ESK-M2G299-A1-2009 ADHESIVE SEALER SYNTHETIC RUBBER HOT APPLIED 60 - 70 DEGREE C HEAT CURING MEDIUM STRENGTH TO BE USED WITH FORD WSS-M99P1111-A 《中等强度的热固化60-70℃热施涂合成橡胶密封胶粘剂 .pdf

FORD ESK-M2G299-A2-2009 ADHESIVE SEALER SYNTHETIC RUBBER HOT APPLIED 120 - 130 DEGREE C NON-REACTIVE TO BE USED WITH FORD WSS-M99P1111-A 《不反应的120-130℃热施涂合成橡胶密封剂胶粘剂 与标准FORD WSS-M.pdf