SFS 4033-1977 《工作场所的次级中心 TAKT16》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ONORM M 7801 Teil 5-1981 Edge preparation shapes of grooves for not füll penetrated cross sections for arc welding on steel《边缘加工 电弧焊接钢不充分深入的截面的沟槽形状》.pdf

ONORM M 7802-1975 Edge preparation for steel tubes grooves of the weld for fusion welding of butt joints from one side manually《钢管边缘加工 对接接头熔焊的焊缝沟槽 单面焊 手动》.pdf

ONORM M 7804 Teil 1-1982 Recommendations for the design of welded joints terms and definitions fusion welding on steel《焊接接头的设计介绍 术语及解释 钢熔焊》.pdf

ONORM M 7804 Teil 2-1982 Recommendations for the design of welded joints edge preparation and Performance fusion welding on steel《焊接接头的设计介绍 边缘加工及性能 钢熔焊》.pdf

ONORM M 7804 Teil 3-1983 Guidelines for the design ofwelded joints welding positions《焊接接头的设计指导 焊接位置》.pdf

ONORM M 7805-1993 Staff for welding - Classification and requirements Personnel technique de soudage - Classification et exigences《焊接人员 分类和要求》.pdf

ONORM M 7806-1983 Qualification test of weiders for welding steel pipe weiders《焊接钢焊接工的资格考试 焊管机》.pdf

ONORM M 7807-1999 Welding for house-installations - Qualification of personnel for welding of low pressure gas steel pipelines《住房安装用焊接 低压天然气钢质管道的焊接人员资格》.pdf

ONORM M 7810 Teil 1-1986 General tolerances for welding constructions dimensions for lengths and angles《焊接结构的一般公差 长度和角度的尺寸规格》.pdf