SIS MNC 1120-1987 Non-destructive testing - Visual inspection of welds《无损检测 焊缝的目测》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

CSN 42 9001-1969 Steel forgings in usual workmanship General regulations《常规工艺下的钢锻件 一般规则》.pdf

CSN 42 9002 Za-1982 《修订a） -12 1982捷克国家标准42 9002 根据复杂的形状对冲模锻件进行分离》.pdf

CSN 42 9002-1968 Classification of drop forgings according to shape complexity《根据形状复杂性对落锤锻件分类》.pdf

CSN 42 9010-1969 Steel forgings in usual workmanship Forged bars Machining allowances and tolerances《常规工艺下的钢锻件 锻造的棒材 机械加工余量和公差》.pdf

CSN 42 9011-1969 Steel forgings in usual workmanship Longitudinal forgings Machining allowances and tolerances《常规工艺下的钢锻件 纵向锻件 机械加工余量和公差》.pdf

CSN 42 9012-1969 Steel forgings in usual workmanship Disks and circular plates Machining allowances and tolerances《常规工艺下的钢锻件 圆盘和圆板 机械加工余量和公差》.pdf

CSN 42 9013-1969 Steel forgings in usual workmanship Rings Machining allowances and tolerances《常规工艺下的钢锻件 环 机械加工余量和公差》.pdf

CSN 42 9014-1969 Steel hammer forgings in usual workmanship Hollow bodies Machining allowances and tolerances《常规工艺下的自由钢锻件 空心管 机械加工余量和公差》.pdf

CSN 42 9030-1986 Steel drop forgings Machining allowances and limit variations of dimensions and forms《落锤钢锻件 尺寸和形状的机械加工余量和变化范围》.pdf