SIS SMS 1097-1948 《配件，角件，内外螺纹，额定压力：10》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS EN 2781-1998 Non-metallic materials - Structural adhesives - Test methods - Determination of the primer thickness《非金属材料 结构胶粘剂 试验方法 初始厚度的测定》.pdf

BS EN 2786-2008 Aerospace series - Electrolytic silver plating of fasteners《航空航天系列 紧固件的电解镀银》.pdf

BS EN 279-1991 Specification for homogenous rubber materials for dynamic seals in domestic appliances using combustible gases up to 200 mbar《使用压力达200毫巴可燃气体的家用器具的动态密封件用均质橡胶材料规范》.pdf

BS EN 2790-1991 Rod ends adjustable self-aligning plain bearing with self-lubricating liner and threaded shank with engagement 1 5 thread Dimensions and loads《带自润滑班轮和螺纹摸柄衔接的自动校准滑动轴.pdf

BS EN 2791-1991 Rod ends adjustable single fork and threaded shank with engagement 1 5 thread diameter Dimensions and loads《啮合量为1 5螺纹直径的单叉螺纹柄可调节的连杆端头 尺寸和负荷》.pdf

BS EN 2792-1991 Rod ends adjustable double fork and threaded shank with engagement 1 5 thread diameter Dimensions and loads《啮合量为1 5螺纹直径的双叉螺纹柄可调节的连杆端头 尺寸和负荷》.pdf

BS EN 2794-001-2014 Aerospace series Circuit breakers single-pole temperature compensated rated current 20 A to 50 A Technical specification《航空航天系列 额定电流为20A~50A的温度补偿单极断路器 技术规范》.pdf

BS EN 2794-003-1999 Circuit breakers single-pole temperature compensated rated currents 20 A to 50 A Metric thread terminals - Product standard《额定电流为20A至50A的温度补偿的单极电路断路器 米制螺纹接头 产品标.pdf

BS EN 2794-004-2014 Aerospace series Circuit breakers single-pole temperature compensated rated currents 20 A to 50 A UNC thread terminals Product standard《航空航天系列 额定电流为20 A至50 A的单极.pdf