SIS SMS 1750-1962 《螺丝刀工具，U型环钥匙，钥匙尺寸》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

MT 502-1996 粉尘采样器检定装置通用.技术条件.pdf

MT 717-1997 煤矿重要用途在用钢丝绳性能.测定方法及判定规则.pdf

MT T 229-2005 烟煤坩埚膨胀序数仪-电加热法通用技术条件.pdf

MT T 238-1991 悬臂式掘进机通用技术条件.pdf

MT T 238.2-2008 悬臂式掘进机.第2部分 型式与参数.pdf

MT T 238.3-2006 悬臂式掘进机.第3部分：通用技术条件.pdf

MT T 246-2006 采掘机械用截齿.pdf

MT T 250.1-1991 矿车修理机械.通用技术要求.pdf

MT T 250.10-1991 矿车修理机械.电动悬臂吊车.pdf