SIS SMS 1895-1970 Welded steel tubes Cold worked precision steel tubes《焊接钢管 冷轧精密钢管》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

NF A92-801-4-2006 Advanced technical ceramics - Methods of test for ceramic coatings - Part 4 determination of chemical composition by electron probe microanalysis (EPMA) 《高级工业陶瓷 .pdf

NF A95-115-1993 Metallic powders Determination of apparent density Part 2 scott volumeter method 《金属粉末 表观密度的测定 部分2 斯可特容积测量法》.pdf

NF A95-123-1993 Metallic powders Determination of green strength by transverse rupture of rectangular compacts 《金属粉末 用矩形压坯的横向断裂测定湿压强度》.pdf

NF A95-152-1993 Metallic powders Determination of particle size by dry sieving 《金属粉末 用干筛法测定粒度》.pdf

NF A95-181-1-1993 Metallic powders Determination of oxygen content by reduction methods Part 1 general guidelines 《金属粉末 还原法测定氧含量 第1部分 通用指南》.pdf

NF A95-181-2-1999 Metallic powders Determination of oxygen content by reduction methods Part 2 loss of mass on hydrogen reduction (hydrogen loss) 《金属粉末 用还原法测定氧含量 第2部分 氢还原时的质量损失(氢损.pdf

NF A95-336-1993 Sintered metal materials and hardmetals Determination of young modulus 《烧结金属材料和硬质合金 弹性模量(杨氏模量)的测定》.pdf

NF A95-353-1993 Permeable sintered metal materials Determination of bubble test pore size 《透气性烧结金属材料 气泡试验法测定孔隙直径》.pdf

NF A95-401-1993 Sintered hardmetals Sampling and testing 《烧结硬质合金 取样和试验》.pdf