SIS SMS 1932-1968 Widths across flats Metric series《对面宽度 公制系列》.pdf

相关资源

SIS SMS 1933-1968 Width across jlats Inch series《对面宽度 英制系列》.pdf

CNS 4379-1983 Thin Nuts with Small Widths Across Flats《低型螺帽（具小对面宽度）》.pdf

CNS 4242-1978 Widths Across Flats and Widths Across Corners for Bolts Screws and Nuts《螺栓、螺钉、螺帽之对面宽度及对角宽度》.pdf

CNS 3120-1987 Hexagon Bolts with Small Widths Across Flats《六角头螺栓（具小对面宽度）》.pdf

CNS 4700-1987 Hexagon Head Bolts with Thread Approximately to Head and with Small Widths Across Flats《六角头全螺纹螺栓（具小对面宽度）》.pdf

SIS SS-ISO 272-1985 Fasteners Hexagon products Widths across f lats《紧固件 六角产品 对面宽度》.pdf

TB T 2884.2-1998 D型承载鞍量具.鞍面宽度样板.pdf

CNS 4366-1987 Hexagon Bolts with Large Widths Across Flats for Steel Structures (Joints with Hightensile Prestressed Bolts)《六角头螺栓（具大对面宽度、高预力连接钢结构用）》.pdf

TB T 2884.2-1998 D型承载鞍量具 鞍面宽度样板.pdf

猜你喜欢

ONORM M 1511-1967 《米制 ISO－螺纹 额定坡度尺寸为 3 mm 的细牙螺纹》.pdf

ONORM M 1512-1967 《米制 ISO－螺纹 额定坡度尺寸为 4 mm 的细牙螺纹》.pdf

ONORM M 1513-1967 《米制 ISO－螺纹 额定坡度尺寸为 6 mm 的细牙螺纹》.pdf

ONORM M 1515-1968 《米制 ISO－螺纹 螺纹选择》.pdf

ONORM M 1530-1979 Thread and thread endsfor wood screws《木螺丝的螺纹和螺纹端》.pdf

ONORM M 1612-1981 Driving Squares for power socket wrenches and hand socket wrenches《助力筒扳扳手和手动套筒扳手驱动方头》.pdf

ONORM M 1613-1997 Widths across flats - Dimensions and tolerances - Metrie series《扳手开口尺寸 尺寸与公差 梅特里系列》.pdf

ONORM M 1620-1-1994 Bolted connections - Assessments for calculation pre-tensioning forces and tightening torques《螺栓连接 计算评估 预拉伸力和拉紧转矩》.pdf

ONORM M 1620-2-1994 Bolted connections - Determination of coefficients of friction when tightening《螺栓连接 紧缩时摩擦系数的测定》.pdf