SIS SS 11 21 39-1984 Aluminium Steel Stranded conductors for overhead lines Tensile testing or the determination of Young-s modulus《铝，钢 架空线路多股绞合线 拉伸试验或杨氏模量的测定》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 23201 1-1978 Alumina Methods of spectral analysis Determination of silicon dioxide iron oxide sodium oxide and magnium oxide《矾土 光谱分析法 二氧化硅、氧化铁 氧化钠和氧化钙含量测定法》.pdf

GOST 23201 2-1978 Alumina Method of spectral analysis Determination of vanadium pentoxide manganese suboxide chromium oxide titanium dioxide and zinc oxide《矾土 光谱分析法 五氧化二矾、一氧化锰、氧化铬、.pdf

GOST 23203-1978 Varistors Series of currents and classification voltages《变阻器 电流系列及分级电压》.pdf

GOST 23207-1978 Fatigue strength Terms definitions and symbols《耐疲劳强度 基本术语、定义和符号》.pdf

GOST 23208-2003 Thermoinsulating cylinders and semicylinders of mineral wool on synthetic binder Specifications《合成粘合剂上的矿物棉保温圆柱体和半圆柱体规范》.pdf

GOST 23209-1978 Versatile press tools for clipping of round in plan view die fordings on crank presses Design and dimensions《在曲轴冲压机上冲压平面为圆形的模锻件的毛边剪切用万能冲压部件 结构及尺寸》.pdf

GOST 23210-1978 Versatile press tools for clipping of die forgings with elondated axis on crank presses Design and dimensions《在曲轴冲压机上冲压的带加长轴模锻件的毛边剪切用万能冲压部件 结构及尺寸》.pdf

GOST 23211-1978 Units of versatile compound dies for clipping and piersing of round in plan vien die fordinds on crank presses Design and dimensions《在曲轴冲压机上冲压的平面为圆形的模锻件的毛边剪切和冲孔用复动万.pdf

GOST 23212-1978 Units of versatile press tools for clipping Specifications《剪切用万能冲压部件 技术要求》.pdf