SIS SS 421 08 81-1991 Electrical installations in explosive gas atmospheres -Inspection and maintenance《爆炸性气体环境中的电气装置 检查和维修》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS HC 202-1973 Specification for precipitation hardening nickel base chromium-niobium-molybdenum-iron-tungsten alloy castings (Cr 20 0 Nb 6 6 Mo 6 0 Fe 3 0 W 2 5)《沉淀硬化镍基铬-铌-钼-铁-钨合金.pdf

BS HC 205-1974 Specification for precipitation hardening nickel base chromium-cobalt-molybdenum-titanium alloy castings (Cr 20 Co 20 Mo 6 Ti 2)《沉淀硬化镍基铬-钴-钼-钛合金铸件规范(铬20、钴20、钼6、钛2》.pdf

BS HC 206-1975 Specification for precipitation hardening nickel base chromium-cobalt-molybdenum-titanium alloy precision castings (Cr 20 Co 20 Mo 6 Ti 2)《沉淀硬化镍基铬-钴-钼-钛合金精密铸件规范(铬20、.pdf

BS HC 301-1973 Specification for cobalt base chromium-nickel-tungsten alloy castings (Cr 25 5 Ni 10 5 W 7 5)《钴基铬-镍-钨合金铸件规范(铬25 5、镍10 5、钨7 5)》.pdf

BS HC 401-1974 Specification for 18% nickel maraging steel precision castings (1600-1850 MPa)《18%镍马氏体时效处理钢精密铸件规范(1600-1850MPa)》.pdf

BS HC 402-1977 Specification for cast iron ring pots (centrifugally cast) (suitable for piston rings up to 200 mm in diameter)《铸铁圆筒规范(离心铸造)(适用于直径小于和等于200mm的活塞环)》.pdf

BS HC 403-1977 Specification for high chromium alloy cast iron ring pots (centrifugally cast) (suitable for piston rings up to 400 mm in diameter)《高铬合金铸件铁环形坩埚规格(离心铸造)(适用于直径达400 mm的.pdf

BS HC 404-1977 Specification for chromium-molybdenum alloy cast iron ring pots (suitable for centrifugally cast and sand cast sealing rings piston rings and cylinder liners)《铬-钼合金铸.pdf

BS HC 502-1981 Specification for copper base aluminium-nickel-iron alloy castings (620 MPa) (Al 9 5 Ni 5 Fe 5)《铜基铝-镍-铁合金铸件规范(620MPa)(铝9 5、镍5、铁5)》.pdf