SIS SS CECC 18000-1984 Generic specification Dry reed change-over contact units mechanically biased《通用规范 机械偏置的干簧转换接触单元机械偏见》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN 1804-2-2001 en Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2 Power set legs and rams (Incorporates Amendment A1 2010)《地下采矿机械 .pdf

EN 1804-3-2006 en Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3 Hydraulic control systems (Incorporates Amendment A1 2010)《煤矿机械 .pdf

EN 1806-2006 en Chimneys - Clay ceramic flue blocks for single wall chimneys - Requirements and test methods《烟囱 单壁烟囱用粘土 陶瓷烟道砖 要求和试验方法-2000》.pdf

EN 1807-1-2013 en Safety of woodworking machines - Band sawing machines - Part 1 Table band saws and band re-saws《木工机械安全性 带锯机械 第1部分 台式带锯机和再分带锯机》.pdf

EN 1807-2-2013 en Safety of woodworking machines - Band sawing machines - Part 2 Log sawing machines《木工机械安全性 带锯机械 第2部分 锯木机》.pdf

EN 1808-2015 en Safety requirements for suspended access equipment - Design calculations stability criteria construction - Examinations and tests《暂停访问设备的安全要求 设计计算 稳定性标准 施工 检查和试验》.pdf

EN 1809-2014 en Diving equipment - Buoyancy compensators - Functional and safety requirements test methods (Incorporates Amendment A1 2016)《潜水装备 浮力补偿器 功能和安全要求 试验方法》.pdf

EN 1811-2011 en Reference test method for release of nickel from all post assemblies which are inserted into pierced parts of the human body and articles intended to come into dire.pdf

EN 1813-1997 en Textile Floor Coverings - Determination of Wool Fibre Integrity Using an Abrasion Machine《铺地织物 用研磨机器对羊毛纤维完整性的测定》.pdf