SIS SS-EN 28 659-1991 Thermoplastic valves Fatigue strength Test method《热塑性电子管 疲劳强度 测试方法》.pdf

相关资源

QC T 316-1999 汽车行车制动器疲劳强度台架试验方法.pdf

SY T 10049-2004 海上钢结构疲劳强度分析推荐作法.pdf

GB T 18029.8-2008 轮椅车 第8部分：静态强度,冲击强度及疲劳强度的要求和测试方法.pdf

QC T 316-1999 汽车行车制动器疲劳强度台架试验方法.doc

HB Z 84.2-1984 航空渐开线圆柱齿轮齿面接触疲劳强度计算.pdf

HB Z 84.3-1984 航空渐开线圆柱齿轮轮齿弯曲疲劳强度计算.pdf

HB Z 89.2-1985 航空锥齿轮.齿面接触疲劳强度计算.pdf

HB Z 89.3-1985 航空锥齿轮.轮齿弯曲疲劳强度计算.pdf

HBm 66.57-1991 微型货车 制动器疲劳强度台架试验方法.pdf

GB T 14229-1993 齿轮接触疲劳强度试验方法.pdf

猜你喜欢

FORD WSS-M4D1009-A1-2012 POLYAMIDE (PA) 66 HEAT STABILIZED 20% GLASS FIBER REINFORCED BLOW MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《热稳定20%玻璃纤维增强聚酰胺(PA)66吹塑材料 与福特WSS.pdf

FORD WSS-M4D1011-A1-2012 POLYAMIDE (PA) 6 HEAT STABILIZED 10% GLASS REINFORCED BLOW MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D1014-A-2010 POLYBUTYLENE TEREPHTHALATE (PBT) MOLDING COMPOUND DIRECT METALLIZABLE GRADE TO BE USED WITH FORD WSS-M99P1111-A 《直接可涂覆金属级聚对苯二甲酸丁二醇酯(PBT)成型料 与标准FORD WSS-M.pdf

FORD WSS-M4D1016-A1-2015 POLYAMIDE (PA) 66 HEAT STABILIZED 25% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D1017-A1-2012 POLYBUTYLENE TEREPHTHALATE (PBT) 30% GLASS FIBER REINFORCED MOLDING COMPOUND HYDROLYSIS RESISTANT TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D1019-A1-2012 POLYAMIDE (PA) 66 HEAT STABILIZED 15%GLASS FIBER REINFORCED BLOW MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《热稳定15%玻璃纤维增强聚酰胺(PA)66吹塑材料 与福特WSS-.pdf

FORD WSS-M4D1023-A1-2012 POLYAMIDE (PA) 6 HEAT STABILIZED 15% GLASS FIBER REINFORCED MOLDING COMPOUND IMPACT MODIFIED INTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D1024-A1-2012 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) MOLD-IN-COLOR MOLDING COMPOUND EXTERIOR HIGH IMPACT LOW STIFFNESS TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D1024-A1-2015 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) MOLD-IN-COLOR MOLDING COMPOUND EXTERIOR HIGH IMPACT LOW STIFFNESS TO BE USED WITH FORD WSS-M99P1111-A .pdf