SIS SS-ISO 2106-1984 Anodizing of aluminium and its alloys - Determination of m ss per unit area (surface density) of anodic oxide coatings - Gravimetric method《铝及铝合金阳极处理 阳极氧化涂层每单位.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WRS-M4D854-B3-2013 POLYPROPYLENE (PP) 30% GLASS FIBER REINFORCED RECYCLED MOLDING COMPOUND 50% PCR AND OR PIR CONTENT TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-.pdf

FORD WRS-M4D854-B5-2017 POLYPROPYLENE (PP) 30% GLASS FIBER REINFORCED LOW FOGGING MOLDING COMPOUND 50% RECYCLED MATERIAL BY WEIGHT TO BE USED WITH FORD WSS-M99P1111-A (Shown on F.pdf

FORD WRS-M4D911-B2-2011 THERMOPLASTIC POLYOLEFIN ELASTOMER MOLDING COMPOUND 90% PCR AND OR PIR CONTENT NON VISIBLE EXTERIOR UNDERBODY TO BE USED WITH FORD WSS-M99P1111-A 《回收级90%.pdf

FORD WRS-M4D939-A2-2015 POLYPROPYLENE (PP) HOMOPOLYMER 33% TALC FILLED MOLDING COMPOUND 37% PCR PIR RESIN CONTENT 25% RECYCLED MATERIAL BY WEIGHT TO BE USED WITH FORD WSS-M99P1111.pdf

FORD WRS-M4D941-B1-2015 POLYPROPYLENE (PP) MOLDING COMPOUND HOMOPOLYMER HEAT STABILIZED 30% GLASS FIBER MICA REINFORCED RECYCLED GRADE 25% PIR PCR NON-VISIBLE APPLICATIONS TO BE U.pdf

FORD WRS-M4D941-B2-2016 POLYPROPYLENE (PP) MOLDING COMPOUND HOMOPOLYMER HEAT STABILIZED 40% GLASS FIBER MICA REINFORCED 15% RECYCLED MATERIAL BY WEIGHT NON-VISIBLE APPLICATIONS TO.pdf

FORD WRS-M4D941-B2-2017 POLYPROPYLENE (PP) MOLDING COMPOUND HOMOPOLYMER HEAT STABILIZED 40% GLASS FIBER MICA REINFORCED 25% RECYCLED MATERIAL BY WEIGHT NON-VISIBLE APPLICATIONS TO.pdf

FORD WRS-M4D952-A4-2016 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) UNFILLED MOLDING COMPOUND 75% RECYCLED MATERIAL BY WEIGHT TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WRS-M4D968-B2-2013 POLYAMIDE (PA) 6 HEAT STABILIZED 30% GLASS FIBER MINERAL REINFORCED 25% PCR AND OR PIR RECYCLED CONTENT TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD.pdf