1、 Approved May 18, 2016 Copyright 2016 by THE SOCIETY OF MOTION PICTURE AND TELEVISION ENGINEERS 3 Barker Avenue, White Plains, NY 10601 (914) 761-1100 Amendment 1:2016 to SMPTE ST 2067-5:2013 SMPTE STANDARD Interoperable Master Format Essence Component Amendment 1 Page 1 of 2 pages Table of Contents
2、 Page 1 Scope 2 2 Replacement Text. 2 Foreword SMPTE (the Society of Motion Picture and Television Engineers) is an internationally-recognized standards developing organization. Headquartered and incorporated in the United States of America, SMPTE has members in over 80 countries on six continents.
3、SMPTEs Engineering Documents, including Standards, Recommended Practices, and Engineering Guidelines, are prepared by SMPTEs Technology Committees. Participation in these Committees is open to all with a bona fide interest in their work. SMPTE cooperates closely with other standards-developing organ
4、izations, including ISO, IEC and ITU. SMPTE Engineering Documents are drafted in accordance with the rules given in its Standards Operations Manual. Amendment 1 to SMPTE ST 2067-5:2013 was prepared by Technology Committee 35PM. Intellectual Property At the time of publication no notice had been rece
5、ived by SMPTE claiming patent rights essential to the implementation of this Engineering Document. However, attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. SMPTE shall not be held responsible for identifying any or all such patent
6、 rights. Amendment 1:2016 to SMPTE ST 2067-5:2013 Page 2 of 2 pages 1 Scope This amendment has been created to address a mistake in the 2013 publication of ST 2067-5. A mistaken value is present in the table in Section 5.3. As defined in item 13, Section 5.1.1, the primary package of the file shall
7、be the top-level File Package. The table entry mistakenly calls out “material package”. 2 Replacement Text In the unlabeled table appearing in Section 5.3, at the row where the value of the column “Set name” has the value “preface”, the value of the column “Constraint” shall be modified as follows: The text “Primary package shall be material package.” shall be replaced in its entirety with the text “The primary package shall be the top-level File Package.”
