SNI 13-4176-1996 Determination of calcium oxide (CaO) in phosphatic rock specimens by atomic absorption spectrometer method《原子吸收光谱法 在磷酸盐的岩石标本中测定氧化钙（氧化钙）》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D7371-2014 red 5556 Standard Test Method for Determination of Biodiesel &40 Fatty Acid Methyl Esters&41 Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy &40 FTIR-ATR.pdf

ASTM D7372-2007 Standard Guide for Analysis and Interpretation of Proficiency Test Program Results《熟练试验程序结果的分析和说明用标准指南》.pdf

ASTM D7372-2012 8750 Standard Guide for Analysis and Interpretation of Proficiency Test Program Results《熟练试验程序结果的分析和说明用标准指南》.pdf

ASTM D7372-2017 5625 Standard Guide for Analysis and Interpretation of Proficiency Test Program Results《熟练试验程序结果的分析和说明用标准指南》.pdf

ASTM D7373-2007 Standard Test Method for Predicting Biodegradability of Lubricants Using a Bio-kinetic Model《用生物动力学模型预测润滑油生物可降解性的标准试验方法》.pdf

ASTM D7373-2007e1 3750 Standard Test Method for Predicting Biodegradability of Lubricants Using a Bio-kinetic Model《用生物动力学模型预测润滑油生物可降解性的标准试验方法》.pdf

ASTM D7373-2012 1209 Standard Test Method for Predicting Biodegradability of Lubricants Using a Bio-kinetic Model《用生物动力学模型预测润滑油生物可降解性的标准试验方法》.pdf

ASTM D7374-2008 516 Standard Practice for Evaluating Elevated Temperature Performance of Adhesives Used in End-Jointed Lumber《端接合木材用胶粘剂高温性能评定的规程》.pdf

ASTM D7374-2008(2015) 4749 Standard Practice for Evaluating Elevated Temperature Performance of Adhesives Used in End-Jointed Lumber《评估端接合木材用胶粘剂高温性能的标准实践规程》.pdf