SNI 13-6012-1999 Preparation of maps of sediments distribution on the surface of the bottom of the sea《海底的沉积物分布图的编制》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SAE AS 961B-1974 Drive - Studded Accessory 5 000 B C Square Design Standard for《方形5 000B C 有钉齿附件传动装置的设计标准》.pdf

SAE AS 962A-1969 Flange - Accessory 5 000 BC Square Design Standard for《5 000 BC方形配件法兰的设计标准》.pdf

SAE AS 9631-2000 SCREW MACHINE - HEXAGON HEAD PD SHANK TITANIUM AMS 4967 138-40 UNJF-3A《螺丝 机器六角头 PD杆 钛AMS 4967 138-40 UNJF-3A螺丝》.pdf

SAE AS 963B-1993 Drive-Studded Accessory (127) 5 000 BC Round Design Standard for《圆形(127) 5 000 BC有钉齿附件传动装置的设计标准》.pdf

SAE AS 964C-1986 Flange - Accessory 5 000 BC Round Design Standard for《5 000 BC圆形配件法兰的设计标准》.pdf

SAE AS 965B-1993 Drive-Studded Accessory (203 2) 8 000 BC Round Design Standard For《(203 2)8 000 BC圆形配件驱动枢的设计标准》.pdf

SAE AS 966B-1978 Flange - Accessory 8 000 BC Round Design Standard for《圆形8 000 BC配件法兰设计标准》.pdf

SAE AS 9676B-2014 BOLT MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD PD SHANK CUP WASHER LOCKED CRES UNS S66286 130 KSI MIN 1900-32 UNJF-3A《 1900-32 UNJF-3A、最小130 KSI、UNS S66286、CR.pdf

SAE AS 9677B-2013 BOLT MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD PD SHANK CUP WASHER LOCKED CRES UNS S66286 130 KSI MIN 2500-28 UNJF-3A《机械螺栓 双精度六角形扩展垫圈头 PD柄 杯型垫圈锁定式CRES UNS S66.pdf