SNI 3954-2014 Oil of cayuput.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN 10263-1-2001 en Steel rod bars and wire for cold heading and cold extrusion Part 1 General technical delivery conditions (Incorporating corrigendum August 2002)《冷加工和冷挤压钢棒 棍和线 第1.pdf

EN 10263-1-2017 en Steel rod bars and wire for cold heading and cold extrusion - Part 1 General technical delivery conditions.pdf

EN 10263-2-2001 en Steel Rod Bars and Wire for Cold Heading and Cold Extrusion - Part 2 Technical Delivery Conditions for Steels Not Intended for Heat Treatment After Cold Working《.pdf

EN 10263-2-2017 en Steel rod bars and wire for cold heading and cold extrusion - Part 2 Technical delivery conditions for steels not intended for heat treatment after cold working.pdf

EN 10263-3-2001 en Steel Rod Bars and Wire for Cold Heading and Cold Extrusion - Part 3 Technical Delivery Conditions for Case Hardening Steels《冷加工和冷挤压钢杆材 棒材和线材 第3部分 渗碳钢技术交货条件[代替 G.pdf

EN 10263-3-2017 en Steel rod bars and wire for cold heading and cold extrusion - Part 3 Technical delivery conditions for case hardening steels.pdf

EN 10263-4-2001 en Steel Rod Bars and Wire for Cold Heading and Cold Extrusion - Part 4 Technical Delivery Conditions for Steels for Quenching and Tempering (Incorporating corrigen.pdf

EN 10263-4-2017 en Steel rod bars and wire for cold heading and cold extrusion - Part 4 Technical delivery conditions for steels for quenching and tempering.pdf

EN 10263-5-2001 en Steel Rod Bars and Steel Wire for Cold Heading and Cold Extrusion - Part 5 Technical Delivery Conditions for Stainless Steels《冷加工和冷挤压钢棒 棍和线 第5部分 不锈钢交付技术条件》.pdf