SNV 081 517-1969 《管道 长颈法兰 J 1 适用于熔焊和 ND 61），NW 600至3600》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

NC 09-04-93-1988 Unified Elements System of Moulds Dies Stampers and Machining Devices Devices Echeloned Alignment Key Design Specifications《模具统一原理系统 冲模，压模和机械装置 机械装置 梯形排列锁 设计规格》.pdf

NC 09-04-94-1988 Unified Elements System of Monlds Dies Stamoers and Machiining Devices Centering Chuck Design Specifications《模具统一原理系统 冲模，压模和机械装置 机械装置 定心卡盘 设计规格》.pdf

NC 09-04-95-1988 Unified Elements System of Moulds Dies Stampers and Machining Devices Devices Carrying Handle Design Specifications《模具统一原理系统 冲模，压模和机械装置 装置运送手柄 设计规格》.pdf

NC 09-04-96-1988 Unified Elements System of Moulds Dies Stampers and Machining Devices Machining Device Locating Pins Design Specifications《模具统一原理系统 冲模，压模和机械装置 机械装置 定位销设计规格》.pdf

NC 09-04-97-1988 Unified Elements System of Moulds Dies Stampers and Machining Devices Machining Devices Bushes for Indexes and Locating Pins with Bead Design Specifications《模具统一原理.pdf

NC 09-04-98-1988 Unified Elements System of Moulds Dies Stampers and Machining Devices Machining Devices Bushings for Locating Pins Design Specifications《模具统一原理系统 冲模，压模和机械装置 机械装置 定.pdf

NC 09-04-99-1988 Unified Elements System of Moulds Dies Stampers and Machining Devices Machining Devices Screws with Bead Design Specifications《模具统一原理系统 冲模，压模和机械装置 机械装置 带珠螺丝钉 设计规格》.pdf

NC 09-05-1968 Standard die sets《标准冲模组》.pdf

NC 09-06-1968 Die frameworks with gray-iron casting or steel cesting bases《灰黑铁铸件或钢带底冲模》.pdf