SNV 24721-1949 《P 型固定联轴器（配合螺栓）拆卸孔 1）》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

NC 09-01-103-1987 Unified Elements System of Moulds Dies Stampers and Machining Devices Moulds Threaded Inserts with Springs Design Specifications《模具统一原理系统 冲模，压模和机械装置 模具 带弹簧螺纹护套规则》.pdf

NC 09-01-104-1987 Unified Elements System of Moulds Dies Stampers and Machining Devices Moulds Threaded Inserts without Springs Design Specifications《模具统一原理系统 冲模，压模和机械装置 统一原理提供规格》.pdf

NC 09-01-106-1987 Unified Elements System of Moulds Dies Stampers and Machining Devices Moulds Round Plates Design Specifications《模具统一原理系统 冲模，压模和机械装置 模具圆盘 设计规格》.pdf

NC 09-01-129-1988 Unified Elements System of Moulds Dies Stampers and Machining Devices Moulds Round Bases Main Dimensions《模具统一原理系统 冲模，压模和机械装置 模具圆底 主要尺寸》.pdf

NC 09-01-130-1988 Unified Eiements System of Moulds Dies Stampers and Machining Devices Moulds Antechamber Nozzle Ends Design Specifications《模具统一原理系统 冲模，压模和机械装置 模具接头设计规格》.pdf

NC 09-01-131-1988 Unified Elements System of Moulds Dies Stampers and Machining Devices Moulds Antechamber Nozzles Design Specifications《模具统一原理系统 冲模，压模和机械装置 模具接头：设计规格》.pdf

NC 09-01-132-1988 Unified Elements System of Moulds Dies Stampers and Machining Devices Moulds Supporting Bushes Desiqn Specifications《模具，压模，加工装置和模具衬套的零件统一制 设计规格》.pdf

NC 09-01-1967 Terminology of cold pressing technique《冷压合术语学》.pdf

NC 09-02-05-1986 Unified Elements System of Molds Dies Stampers and Machining Devices Dies Frameworks《模具统一原理系统 冲模，压模和机械装置 模具 冲模框架》.pdf