SNV 71510 b-1959 《冬季扫雪服务》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN ISO 7319-1996 Aerospace - Fluid systems - Interface of 24 cone metric couplings (ISO 7319 1992)《航空航天 流体系统 24度锥形公制联轴器界面 (ISO 7319 1992)》.pdf

DIN ISO 732-2003 Photography - 120-size and 220-size films - Dimensions (ISO 732 2000)《摄影 120和220胶片 尺寸》.pdf

DIN ISO 7320-1996 Aerospace - Couplings threaded and sealed for fluid systems - Dimensions (ISO 7320 1992)《航空航天 流体系统用螺纹密封联轴器 尺寸 (ISO 7320 1992)》.pdf

DIN ISO 7331-2011 Ski-poles for alpine skiing - Requirements and test methods (ISO 7331 2011)《对高山滑雪用滑雪杖的要求和试验方法(ISO 7331-2011)》.pdf

DIN ISO 7364-1985 Shipbuilding and marine structures deck machinery accommodation ladder winches identical with ISO 7364 edition 1983《造船海上结构 甲板机械 舷梯绞车》.pdf

DIN ISO 7368-1994 Hydraulic fluid power two-port slip-in cartridge valves cavities identical with ISO 7368 1989《液压流体动力 两通口筒形插入阀 阀腔》.pdf

DIN ISO 7388-1-2014 Tool shanks with 7 24 taper for automatic tool changers - Part 1 Dimensions and designation of shanks of forms A AD AF U UD and UF (ISO 7388-1 2007)《自动换刀用7 24圆锥.pdf

DIN ISO 7388-2-2014 Tool shanks with 7 24 taper for automatic tool changers - Part 2 Dimensions and designation of shanks of forms J JD and JF (ISO 7388-2 2007)《自动换刀用7 24圆锥工具柄 第2部分.pdf

DIN ISO 7388-3-2015 Tool shanks with 7 24 taper for automatic tool changers - Part 3 Retention knobs for shanks of forms AC AD AF UC UD UF JD and JF (ISO 7388-3 2013)《锥度为7 24的自动工具更.pdf