SS 375 Pt 2-2-1-2001 SPECIFICATION FOR Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality r a.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM F733-1990(2003) Standard Practice for Optical Distortion and Deviation of Transparent Parts Using the Double-Exposure Method《用双曝光法测定透明部件的光学畸变和偏差的标准实施规范》.pdf

ASTM F733-2009 Standard Practice for Optical Distortion and Deviation of Transparent Parts Using the Double-Exposure Method《用双曝光法测定透明部件的光学畸变和偏差的标准实施规范》.pdf

ASTM F733-2009(2014) Standard Practice for Optical Distortion and Deviation of Transparent Parts Using the Double-Exposure Method《采用双曝光法的透明零件光学畸变和偏差的标准实践规程》.pdf

ASTM F734-1995(2006) Standard Test Method for Shear Strength of Fusion Bonded Polycarbonate Aerospace Glazing Material《航空航天用熔化胶结聚碳酸酯透明材料的剪切强度》.pdf

ASTM F734-1995(2011) Standard Test Method for Shear Strength of Fusion Bonded Polycarbonate Aerospace Glazing Material 《航空航天用熔化胶结聚碳酸酯镶玻璃材料剪切强度的标准试验方法》.pdf

ASTM F734-2017 Standard Test Method for Shear Strength of Fusion Bonded Polycarbonate Aerospace Glazing Material《航空航天用熔化胶结聚碳酸酯镶玻璃材料剪切强度的标准试验方法》.pdf

ASTM F735-2006 Standard Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using the Oscillating Sand Method《用摆动沙袋法测定透明塑料及涂层抗磨损性的标准试验方法》.pdf

ASTM F735-2011 Standard Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using the Oscillating Sand Method 《用摆动沙袋法测定透明塑料及涂层抗磨损行的标准试验方法》.pdf

ASTM F735-2017 Standard Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using the Oscillating Sand Method《采用振荡砂法测定透明塑料和涂料耐磨性的标准试验方法》.pdf